basket-icon

My Cart

Items: 
Value: 

Model A Ford

Hubs & Bearings

Hub Puller Information

Hub Puller Information

1928-29 Economy Hub Puller - Shouldered Hub A-1114-PS

1928-29 Economy Hub Puller - Shouldered Hub A-1114-PS

Economy Hub Puller for the 1928-31 Model A Ford with the shoulder hub.

Opening at base of puller hooks around PROTRUDING RING on hub. One inch bolt at end of puller must be tighten down aginst axle end to loosen hub from axle.

Strong ductile iron. A copy of an early after market puller.

Made in USA

Availability:  3 In Stock!


Price: £97.00  (£116.40 Incl. vat)

1928-31 Economy Hub Puller - Grooved Hub A-1114-PL

1928-31 Economy Hub Puller - Grooved Hub A-1114-PL

Economy Hub Puller for the 1928-31 Model A Ford with the grooved type hub.

Opening at base of puller hooks into the groove on the hub. One inch bolt at end of puller must be tighten down aginst axle end to loosen hub from axle.

Strong ductile iron. A copy of an early after market puller.

Made in USA

Availability:  3 In Stock!


Price: £97.00  (£116.40 Incl. vat)

1928-48 Universal Hub Puller A-1114-X

1928-48 Universal Hub Puller A-1114-X

Universal hub puller designed to pull rear brake hubs on American Ford vehicles from 1928 to 1948.

The puller is equipped with two sets of split rings allowing you to work on either style of rear hub, those with an inside groove or those with an outside ring.

Made in USA.

Availability:  2 In Stock!


Price: £199.00  (£238.80 Incl. vat)

1928-31 Hub Bearing Race Removal Tool A-1201-T

1928-31 Hub Bearing Race Removal Tool A-1201-T

This tool is a copy of an original tool made by KR Wilson to remove the races from the front hubs.

The original KR Wilson Design has been improved by making this tool work on both the inner & the outer races instead of having two separate tools.

This comes with two specially designed pullers, and receiving caps so it can used to pull both races.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £71.00  (£85.20 Incl. vat)

1928-31 Front Hub A-1105

1928-31 Front Hub A-1105

Front Hub for the 1928-31 Model A Ford.

A top quality reproduction of the front wheel hub. Fits all years.

Made in the USA.

Availability:  2 In Stock!


Price: £279.00  (£334.80 Incl. vat)

1928-31 Front Hub/Drum Assembly  A-1106

1928-31 Front Hub/Drum Assembly A-1106

Complete New Front Hub/Drum Assembly for the 1928-31 Model A Ford.

A new cast iron brake drum and hub assembled with new wheel studs.

The drum has been turned true after the hub was installed. Bearings and races not included.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £499.00  (£598.80 Incl. vat)

1928-31 Rear Hub A-1115

1928-31 Rear Hub A-1115

Rear Hub for the 1928-31 Model A Ford.

A top quality reproduction.

Made in the USA.

Availability:  4 In Stock!


Price: £259.00  (£310.80 Incl. vat)

1928-31 Rear Hub/Drum Assembly  A-1116

1928-31 Rear Hub/Drum Assembly A-1116

Complete new Rear Hub/Drum Assembly for the 1928-31 Model A Ford.

A new brake drum and hub assembled with new wheel studs.

The drum has been turned true after the hub was installed.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £499.00  (£598.80 Incl. vat)

1928-35 Hub Stud  A-1107

1928-35 Hub Stud A-1107

1928-35 Original syle hub stud with the flat sides.

Vintage Ford studs don't just push in place like modern studs. They just push through the hole, and the shoulder of the stud actually gets squashed against the drum, making the hub and drum into one assembly.

0.56" shoulder size. The A-1109-T tool squashes the shoulder against the drum, using a 25 ton hydraulic press.

Note: These bolts have longer shoulders for cast iron drums. The shoulder must be turned down for use with original stamped steel drums.

Fits the following:
Model A Ford (Front)
1932-35 Ford (Front and rear)
1937 Ford Car and Pickup (Rear)

Availability:  20 In Stock!


Price: £3.00  (£3.60 Incl. vat)

1928-31 Rear Hub Stud A-1118

1928-31 Rear Hub Stud A-1118

Rear hub Stud 1928-31.

Vintage Ford studs don't just push in place like modern studs. They just push through the hole, and the shoulder of the stud actually gets squashed against the drum, making the hub and drum into one assembly.

0.56" shoulder size. The A-1109-T tool squashes the shoulder against the drum, using a 25 ton hydraulic press.

Note: These bolts have longer shoulders for cast iron drums. The shoulder must be turned down for use with original stamped steel drums. Made in the USA.

Availability:  92 In Stock!


Price: £3.00  (£3.60 Incl. vat)

1928-48 Wheel Stud Installation Tool A-1109-T

1928-48 Wheel Stud Installation Tool A-1109-T

Stud swedging tool for the 1928-31 Model A Ford and 1932-48 Ford V8.

This tool is a must for putting new wheel studs in your model A or V8.

Vintage Ford studs don't just push in place like modern studs. They just push through the hole, and the shoulder of the stud actually gets squashed against the drum.

This is the tool that squashes the shoulder against the drum. Must be done using a 25 ton hydraulic press.

Made in the USA.

Availability:  6 In Stock!


Price: £13.50  (£16.20 Incl. vat)

1926 - 1931 Swedge Cutting Tool A-1108

1926 - 1931 Swedge Cutting Tool A-1108

This tool only works on the 1/2" studs which were used on 1926-27 Model T's with wire wheels or on 1928-31 Model A Fords.

The cutter is hollow so it slides over the threaded end of the wheel studs and then cuts the swedged shoulder off of the wheel stud.

This is necessary when changing brake drums so you don't damage or distort the flange of the hub. U.S.A.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £178.00  (£213.60 Incl. vat)

1928-34  Front Hub Inner Seal  A-1190

1928-34 Front Hub Inner Seal A-1190

Front Hub Inner Seal 1928-34. For the front hub, this is the metal drive in seal that seals the hub around the front spindle.

Correct I.D. Of 1.621/1.624" and O.D. Of 2.485/2.490".

Made in USA.

Availability:  9 In Stock!


Price: £9.50  (£11.40 Incl. vat)

1928-35 Front Wheel Hub Nut  A-1193

1928-35 Front Wheel Hub Nut A-1193

Front Wheel Hub Nut.

This is the castle nut that hold the front hub on the spindle.

Fits the following:
1928-31 Model A Ford
1932-35 American Ford V8
V8 Pilot.

Made in USA.

Availability:  10 In Stock!


Price: £3.50  (£4.20 Incl. vat)

1928-48 Rear Axle Nut Set A-4242

1928-48 Rear Axle Nut Set A-4242

Rear Axle Castellated nuts for holding on rear hubs.

Set of 2. Made in USA.

Availability:  5 In Stock!


Price: £6.50  (£7.80 Incl. vat)

1928-48 Rear Axle Key Set A-4243

1928-48 Rear Axle Key Set A-4243

1928-48 Rear stub axle key set.

Check your old keys to be sure that they aren't worn, as worn keys will damage the keyway in the stub axle.

Set of 2.

Made in USA.

Availability:  15 In Stock!


Price: £5.50  (£6.60 Incl. vat)

1928-48 Axle Washer Set A-4244-SW

1928-48 Axle Washer Set A-4244-SW

Axle washers 1928-48. These 1/8" thick washers go between the nut and the fibre washer that hold the rear hub to the axle.

Size 1 3/16" diameter with a 5/8" hole size.

Set of two. Made in USA.

Availability:  1 In Stock!


Price: £2.50  (£3.00 Incl. vat)

1928-48 Axle Hub Gasket Set  A-4244

1928-48 Axle Hub Gasket Set A-4244

Rear axle hub gasket set for the 1928 - 1931 Model A and the 1932 -1948 American V8.

These are a thick cork or fibre washer that goes in the recess of the rear hub, under the steel washer. Set of 2.

Made in USA.

Availability:  6 In Stock!


Price: £2.50  (£3.00 Incl. vat)

1928-48 Front Wheel Bearing Retainer A-1195

1928-48 Front Wheel Bearing Retainer A-1195

Front wheel Bearing Retainer that fits between front wheel bearing and axle nut.

Fits the following:
1928-31 Model A Ford
1935-48 American Ford V8
V8 Pilot.

Availability:  12 In Stock!


Price: £3.50  (£4.20 Incl. vat)

1928-48 Front Outer Wheel Bearing A-1216

1928-48 Front Outer Wheel Bearing A-1216

Front Wheel Outer Bearing for the 1928-48 Ford passenger cars including V8 Pilot and 1928-47 pickup.

Quality bearings made by Timken.

Made in USA

Availability:  9 In Stock!


Price: £48.00  (£57.60 Incl. vat)

1928-48 Front Outer Bearing Race A-1217

1928-48 Front Outer Bearing Race A-1217

Front Wheel outer bearing race for the 1928-48 Ford passenger cars including V8 Pilot and 1928-47 pickup.

Quality bearings made by Timken.

Made in USA

Availability:  9 In Stock!


Price: £17.50  (£21.00 Incl. vat)

1928-48 Front Inner Wheel Bearing A-1201

1928-48 Front Inner Wheel Bearing A-1201

Front Wheel Inner Bearing for the 1928-48 Ford passenger cars including V8 Pilot and 1928-47 pickup.

Quality bearings made by Timken.

Made in USA

Availability:  12 In Stock!


Price: £33.50  (£40.20 Incl. vat)

1928-48 Front Inner Bearing Race A-1202

1928-48 Front Inner Bearing Race A-1202

Front Wheel Inner bearing race for the 1928-48 Ford passenger cars including V8 Pilot and 1928-47 pickup.

Quality bearings made by Timken.

Made in USA

Availability:  10 In Stock!


Price: £21.00  (£25.20 Incl. vat)

1928-31 Hub Bearing Race Install Tool A-1202-T

1928-31 Hub Bearing Race Install Tool A-1202-T

Use this tool to easily install both the inner and outer race into the front hub without damaging the race surface.

Availability:  2 In Stock!


Price: £60.00  (£72.00 Incl. vat)

1928-48 Axle Housing Race Repair Kit A-1225-SL

1928-48 Axle Housing Race Repair Kit A-1225-SL

Rear axle housing race repair sleeve for the 1928-48 American Fords.

If your roller bearing is fitting loose on the axle housing, you can repair it by turning your old housing down, and pressing on the new race. Instructions for machining included.

Original axle race O.D. is 2.061 to 2.063. Turn old axle race to .0005 larger than the I.D. of the new race for a press fit.

Made in the USA.

Fits:
1928-48 American Ford passenger car
1928-47 American Ford pickup


Availability:  6 In Stock!


Price: £47.50  (£57.00 Incl. vat)

1928-36 Rear Wheel Bearing A-1225

1928-36 Rear Wheel Bearing A-1225

1928-36 vintage ford model A and V8 rear wheel bearing 1 23/32" Long, 3.10" O.D.

Availability:  5 In Stock!


Price: £68.50  (£82.20 Incl. vat)

1936-48 Rear Wheel Bearing 68-1225

1936-48 Rear Wheel Bearing 68-1225

1936-48 Ford V8 Rear Wheel Bearing
2.81" OD X 1-21/32" Long.

(Also used in our A-1115-RK hub repair kit).

Fits 1936-48 American Ford V8 Passenger car & 1/2 Ton Pickup, plus V8 Pilot.

Availability:  2 In Stock!


Price: £59.50  (£71.40 Incl. vat)

1928-36 Rear Hub Repair Kit  A-1115-RK

1928-36 Rear Hub Repair Kit A-1115-RK

Hub Repair Kit for the 1928-36 model A Ford and Ford V8.

This kit contains one machined sleeve, and one 68-1225 bearing to repair a worn hub.

Simply press the sleeve into the hub, and this bearing has a little smaller O.D but same I.D. As the original bearing.

Sleeve dimensions 2.81" ID, 3.19" OD.

Made in the USA.

Availability:  2 In Stock!


Price: £153.00  (£183.60 Incl. vat)

1928-38 Rear Hub Seal A-1175

1928-38 Rear Hub Seal A-1175

Rear Hub Seal for the 1928-38 Model A Ford and Ford V8. (2 required).

The large seal for the rear wheel hub. Press into hub to keep dirt out of the roller bearing. 3.195" OD.

Also fits some English V8 Pilot (Check the O.D. size first).

Availability:  14 In Stock!


Price: £8.50  (£10.20 Incl. vat)

1928-38 Rear Hub Seal Tool A-1175-T

1928-38 Rear Hub Seal Tool A-1175-T

1928-38 Rear Hub Seal Tool.

Use this tool to help you install the A-1175 rear hub grease seal to the correct depth for the snap ring installation.

Made in USA

Availability:  3 In Stock!


Price: £35.00  (£42.00 Incl. vat)

1928-38 Snap Ring A-1180

1928-38 Snap Ring A-1180

Snap Ring for the 1928-38 Ford car and pickup.

Snaps into the rear hub to hold the A-1175 seal in place. 3 - 11/32" OD.

This is also the snap ring for the gearbox casing.

Made in USA

Availability:  5 In Stock!


Price: £3.50  (£4.20 Incl. vat)

Recently Viewed