Brakes

Brake adjusting shaft 1928-34 A-2042

Brake adjusting shaft 1928-34. These are the clevises that mount on the end of the brake shoe and rest against the brake adjusting wedge. Need 8 per car.

Availability: In Stock!

Price: £7.50 (£9.00 Including vat at 20%)

35-38 Stop Light Switch 48-13480

Stop Light Switch, Passenger & Commercial

Availability: In Stock!

Price: £22.08 (£26.50 Including vat at 20%)

39-79 Stop Light Switch C1AZ-13480-A

Stop Light Switch which screws into the master cylinder.

Availability: In Stock!

Price: £22.08 (£26.50 Including vat at 20%)

32-34 Stop Light Switch Spring B-13515

The Stop Light Switch Spring for the 32 and 32-34 pickup.

Availability: In Stock!

Price: £5.21 (£6.25 Including vat at 20%)

39-48 Master Cylinder 91A-2140

Brand New master cylinder for the 1939-1948 Passenger car and 1940-1952 Pickup.

Availability: In Stock!

Price: £83.33 (£99.99 Including vat at 20%)

1939-48 Rear Brake Hose 91A-2078-A

Rear Brake Hose for the 1939-48 passenger car, and 1939-41 pickup.

Availability: In Stock!

Price: £16.66 (£19.99 Including vat at 20%)

1939-48 Front Brake Hose 99A-2079-A

Front Brake Hose for the 1939-48 passenger car, and 1939-47 pickup. 15 3/4" long.

Availability: Special Order! (Price subject to change. We will email you confirmation of the latest price before ordering).

Price: £18.32 (£21.99 Including vat at 20%)

1940-47 Front Brake Hose 01T-2078

Front Brake Hose for the 1940-47 Commercials, 18 1/4" long.

SORRY, ONLY ONE IN STOCK.

Availability: In Stock!

Price: £18.32 (£21.99 Including vat at 20%)

1939-48 Front Wheel Cylinder 21A-2061

Right Front Wheel Cylinder. This Is A 1942-48 Cylinder Which Will Retro-Fit 1939-41. (Also 48-51 F-2&3 Pickup) However, Replace In Pairs To Maintain Equal Braking Action.

Availability: In Stock!

Price: £45.83 (£55.00 Including vat at 20%)

1939-48 Front Wheel Cylinder 21A-2062

Left Front Wheel Cylinder. This Is A 1942-48 Cylinder Which Will Retro-Fit 1939-41. (Also 48-51 F-2&3 Pickup) However, Replace In Pairs To Maintain Equal Braking Action.

Availability: In Stock!

Price: £45.83 (£55.00 Including vat at 20%)

1939-48 Rear Wheel Cylinder 91A-2261

Right Side 1939-48 Rear Wheel Cylinder.

Availability: In Stock!

Price: £45.83 (£55.00 Including vat at 20%)

1939-48 Rear Wheel Cylinder 91A-2262

Left side 1939-48 Rear Wheel Cylinder.

Availability: In Stock!

Price: £45.83 (£55.00 Including vat at 20%)

1939-48 Hand Brake Cable Equalizer 91A-2119

Hand Brake Cable Equalizer for the 39-48 passenger car and 42-47 pickup.

Availability: In Stock!

Price: £4.99 (£5.99 Including vat at 20%)

Brake pedal Clevis 1928-36 A-2461

Brake pedal Clevis 1928-36. This 2-prong clevis is used on the brake pedal to cross shaft rod. Forged. Made in USA.

Availability: In Stock!

Price: £4.58 (£5.50 Including vat at 20%)

Brake rod Clevis pin Standard Size 1928-31 A-2462

Brake rod Clevis pin Standard Size 1928-31. Fits all of the brake rods. This is the standard size which is 0.310 diameter. If your pins holes are worn, you can drill them out and put in the oversize pins (A-2463) which are 0.340 diameter. Made in USA. Price each.

Availability: In Stock!

Price: £0.63 (£0.75 Including vat at 20%)

Brake rod Clevis pin Oversize. 1928-32 A-2463

Brake rod Clevis pin Oversize. 1928-32. Fits all of the brake rods. If your pins holes are worn, you can drill them out and put in these oversize which are 0.340 diameter. Made in USA. Price each.

Availability: In Stock!

Price: £0.63 (£0.75 Including vat at 20%)

Brake Shoe Roller Pins 1928-34 A-2045

Brake Shoe Roller Pins 1928-34. Uses one per brake shoe and holds the A-2023 rollers on. Zinc plated and hardened for longlife. Correct head. Made in USA.

Availability: In Stock!

Price: £0.83 (£1.00 Including vat at 20%)

1928-36 Brake Wedge Dust cap A-2041-C

Brake Wedge Dust cap 1928-36. When replacing the brake adjust wedges, these are the caps that pop out of the backing plate. Made just like the originals. Made in USA.

Availability: In Stock!

Price: £2.08 (£2.50 Including vat at 20%)

Brake Adjusting wedge tool 1928-36 A-2041-T

Brake Adjusting wedge tool 1928-36. The tool is made special to slip over the square end of the adjusting wedge for adjusting the brake. Powder coated black!

Availability: In Stock!

Price: £13.33 (£16.00 Including vat at 20%)

Brake Adjustment wedge 1928-36 A-2041

Brake Adjustment wedge 1928-36. This is the wedge with the square on the end that sticks through the backing plate so that you can adjust the brakes. Plated and heat treated. Need four. Made in USA.

Availability: In Stock!

Price: £12.08 (£14.50 Including vat at 20%)

Brake Lining Riveting tool 1926-48. A-2018

Brake Lining Riveting tool 1926-48.. This little anvil clamps in a vice and makes riveting or removing old linings a snap! Kit comes with a punch to knock out old rivets, a tool to sedge new tubular rivets, and a tool to drill and countersink linings.

Availability: In Stock!

Price: £33.33 (£39.99 Including vat at 20%)

Brake shoe roller 1928-34 A-2023

Brake shoe roller 1928-34. A cad plated and heat treated roller. An exact repo. (16 per vehicle required)

Availability: In Stock!

Price: £1.25 (£1.50 Including vat at 20%)

1939-48 Brake Lining Set 91A-2007

8 Pieces, With Rivets, Passenger & 39-47 1/2 Ton Pickup

Availability: In Stock!

Price: £73.33 (£88.00 Including vat at 20%)

Housing Race Repair Kit 1928-36 A-1225-SL

Housing Race Repair Kit 1928-36. Requires machining. If your roller bearing is fitting loose on the axle housing, you can repair it by turning your old housing down, and pressing on the new race. Instructions for machining included. Made in the USA.

Availability: In Stock!

Price: £22.08 (£26.50 Including vat at 20%)

35-48 Front Hub Seal 48-1190

Front Wheel, Passenger, 32-47 Pickup

Availability: In Stock!

Price: £4.58 (£5.50 Including vat at 20%)

Front wheel Bearing Retainer 1928-48 A-1195

Front wheel Bearing Retainer 1928-48. 28-56 Commercial. The retainer between front wheel bearing and axle nut.

Availability: In Stock!

Price: £2.92 (£3.50 Including vat at 20%)

1928-34 Front Hub Inner Seal A-1190

Front Hub Inner Seal 1928-34. For the front hub, this is the metal drive in seal that seals the hub around the front spindle. . Correct I.D. Of 1.621/1.624, and O.D. Of 2.485/2.490.

Availability: In Stock!

Price: £6.25 (£7.50 Including vat at 20%)

1928-48 Axle hub gasket set A-4244

Axle hub gasket 1928-48. A heavy fibre washer that goes in the recess of the hub under A-4244-SW. Set of 2. Made in USA.

Availability: In Stock!

Price: £1.46 (£1.75 Including vat at 20%)

28-36 Rear Wheel Bearing A-1225

28-36 Rear Wheel Bearing 1 23/32" Long, 3.10" O.D.

Availability: In Stock!

Price: £37.50 (£45.00 Including vat at 20%)

36-48 Rear Wheel Bearing 68-1225

1 21/32" Long, 2.84" O.D.

Availability: In Stock!

Price: £32.08 (£38.50 Including vat at 20%)

38-48 Rear Hub Seal 78-1175

Rear Hub (2.84" O.D.), Passenger & 1/2 Ton Pickup

Availability: In Stock!

Price: £5.83 (£7.00 Including vat at 20%)

Rear Hub Snap Ring 1928-38 A-1180

Rear Hub Snap Ring 1928-38 passenger and pickup. Snaps into the rear hub to hold the A-1175 seal in place. 3 - 11/32" OD.

Availability: In Stock!

Price: £2.92 (£3.50 Including vat at 20%)

Rear Hub Seal 1928-38 A-1175

Rear Hub Seal 1928-38. The large seal for the rear wheel hub. Press into hub to keep dirt out of the roller bearing. 3.195" OD. (2 required).

Availability: In Stock!

Price: £4.99 (£5.99 Including vat at 20%)

Standard Flathead Ted Brake Floater kit 1928-35

The kit that everyone is talking about. This product is made to fit Models A, B, 1933, 1934, 1935 Ford V8's.
Ted spent over a year developing and fine tuning this brake device resulting in vast improvements in braking ability for the cars it has been fitted to.
This product gives a true full floating 100% servo action, unlike other products on the market that will only give you around 50%.
If you are thinking of converting to later hydraulic brakes or Lincoln backing plates on your Model A, Rat Rod or early V8, this is the product for you!
This product is more affordable than hydraulic brake conversions and is high quality with hardened components. You will be surprised how well these kits work!
All kits come with complete instructions on how to fit the kit. It is a simple process taking only 2 to 3 hours to fit and does not require any drilling, welding or cutting.
The components bolt onto the existing backing plate holes at the top adjuster and bottom anchor pin and eliminates the need to build up the lower track. The rear components fit onto the top adjuster. If required, your brakes can be return to the standard components without any hassle.

Availability: In Stock!

Price: £124.99 (£149.99 Including vat at 20%)

Early Ford V8 Parts | Brakes

**sRecentPrefix**				<br/><br/><div class="recenththeader"><input class="recenthtbuttonright" id="scrollbackrecent" type="button" value="    Next >>" onclick="ScrollBackRecent();"><input class="recenthtbuttonleft" id="scrollforwardrecent" type="button" value="<< Previous" onclick="ScrollForwardRecent();"><div style="text-align:center">Recently Viewed</div></div><br clear="all"/><table id="recenthtitem"> **sRecentImageRowPrefix**	<tr><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageItem**			<td class="recenthtitemimage"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" ><img border="0" width="75" src="_THUMB_" alt="_NAME_" /></a></td><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageRowSuffix**	</tr> **sRecentDescRowPrefix**	<tr> **sRecentDescItem**			<td class="recenthtitemdesc"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" >_NAME_</a></td> **sRecentDescRowSuffix**	 **sRecentPriceRowPrefix**	<tr> **sRecentPriceItem**			<td class="recenthtitemprice">_PRICE_</td> **sRecentPriceRowSuffix**	</tr> **sRecentDeleteRowPrefix**	<tr> **sRecentDeleteItem**		<td class="recenthtitemdelete"><a href="javascript:DeleteRecent('_PID_', true);"><img src="xit.jpg" border="0" /></a></td> **sRecentDeleteRowSuffix**	</tr> **sRecentSuffix**				</table> **sRecentEmptyList**

Best Sellers

Indicator lamp pair 6 volt - INDCBU6