Water Pump

Ford Model A Parts | Cooling | Water Pump

DVD - Rebuilding Ford Model A Water Pumps

A Video technical seminar for the Model A Ford water pump by Alex Janke & Bob Grady, MAFCA Judges.
Let them guide you through the rebuilding of your leakless water pump.
Contents:
Overview of Model A water pumps on original cars
Advantages of using leakless pump design today
Disassembly of your old water pump
Using modern rebuild kit to create a leakless pump
This video was produced by the Diablo A’s. This is NOT a professionally made video. It is an edited version of the technical seminar conducted for our club members. We believe the information and techniques shown on the video will help you in your Model A restoration and maintenance efforts. Running Time: 28 minutes.

Availability: 2 In Stock!

Price: £16.66 (£19.99 Including vat at 20%)

Penrite Water Pump Grease

If you are not using the modern greaseless water pump on your model A, this is the grease required for your rear greasing point on the water pump. 50g tub.

Availability: 23 In Stock!

Price: £3.13 (£3.75 Including vat at 20%)

Fan belt 1928-31 A-8620

Fan belt 1928-31. This is a good quality black fan belt. Non-cogged as original. Made in USA.

Availability: 1 In Stock!

Price: £16.63 (£19.95 Including vat at 20%)

Water pump 1928-31 A-8501

Water pump 1928-31. American made pump. Don't forget to grease pump before using and EVERY 500 MILES. This is built up as an original with a regular pack nut/packning and a mild steel shaft. Gasket and fan mounting kit included. Made in USA.

Availability: 2 In Stock!

Price: £100.00 (£120.00 Including vat at 20%)

1928-31 Leakless Water Pump A-8503-A

Leakless/ball bearing water pump with Brass Nut plus this one has the upgraded rear cartridge so you never have to grease it. The nose of the pump housing has been bored out to accept a ball bearing that is pressed onto the shaft to eliminate end play. Made in USA.

Availability: 2 In Stock!

Price: £145.83 (£175.00 Including vat at 20%)

Leakless water pump Model B 32-34 B-8501

Leakless design water pump for the Model B engine complete with stainless shaft. 1932-1934.
If you are not sure if you have a model B engine in your model A, the model B water pump has a 3 bolt fixing.

Availability: 1 In Stock!

Price: £187.50 (£225.00 Including vat at 20%)

Water pump rebuild kit With Steel Shaft 1928-31 A-8591

Water pump rebuild kit With Steel Shaft 1928-31. This kit has all the parts to rebuild the water pump. If the old casting is good, why buy a new pump? Save yourself a few bucks. Fits 1928-31 pumps. Shaft comes with impeller installed. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £61.67 (£74.00 Including vat at 20%)

Water pump rebuild kit With Stainless Shaft 1928-31 A-8591-SS

Water pump rebuild kit With Stainless Shaft 1928-31. This kit has all the parts to rebuild the water pump. If the old casting is good, why buy a new pump? Save yourself a few bucks. Fits 1928-31 pumps. Shaft comes with impeller installed. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £65.83 (£79.00 Including vat at 20%)

Water pump rebuild kit With Stainless Shaft Model B 1932-34 - A8591RKB

Water pump rebuild kit With Stainless Shaft 1932-34 Model B. This kit has all the parts to rebuild the water pump. If you are not sure if you have a model B engine in your model A, the model B water pump has a 3 bolt fixing.

Availability: 1 In Stock!

Price: £99.17 (£119.00 Including vat at 20%)

Stainless & leakless pump kit Brass 1928-29 A-8591-SSB

Stainless & leakless pump kit Brass 1928-29. The ultimate in water pump rebuild kits! This kit has the stainless shaft along with the leakless pack nut. Comes with either the brass or the zinc leakless nut. Will make your old pump virtually maintenance free! Shaft comes with impeller installed. Made in USA.

Availability: 3 In Stock!

Price: £66.66 (£79.99 Including vat at 20%)

Stainless & leakless pump kit Zinc 1930-31 A-8591-SSZ

Stainless & leakless pump kit Zinc 1930-31. The ultimate in water pump rebuild kits! This kit has the stainless shaft along with the leakless pack nut. Comes with either the brass or the zinc leakless nut. Will make your old pump virtually maintenance free! Shaft comes with impeller installed. Made in USA.

Availability: 1 In Stock!

Price: £70.42 (£84.50 Including vat at 20%)

Modern Water pump kit Brass 1928-29 A-8512-B

Modern Water pump kit Brass 1928-29. This kit will convert your pump housing to a modern type. Shaft has a sealed bearing insert that presses into front of pump. The casting where rear bushing assembly pressed into your old housing must be 1.015/1.016 and the nose of your pump must be 1.187 in order to use this kit. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £95.42 (£114.50 Including vat at 20%)

Modern pump kit Zinc 1930-31 A-8512-Z

Modern pump kit Zinc 1930-31. This kit will convert your pump housing to a modern type. Shaft has a sealed bearing insert that presses into front of pump. The casting where rear bushing assembly pressed into your old housing must be 1.015/1.016 and the nose of your pump must be 1.187 in order to use this kit. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £95.42 (£114.50 Including vat at 20%)

1928-31 Water Pump Casting A-8501-PB

Water pump casting 1928-31. For the do-it-yourselfer or if you just want to custom design your own pump. Original style. Made in USA.

Availability: 2 In Stock!

Price: £43.33 (£52.00 Including vat at 20%)

Water Pump adapter 1928-31 A-8501-ADP

Water Pump adapter 1928-31. Adapts 3-bolt style 1932-35 V-8 water pump to the model A head. Aluminium. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £67.50 (£81.00 Including vat at 20%)

Water pump studs 1928-31 A-8501-MB

Water pump studs 1928-31. Studs that screw into the head to mount up the water pump. Each set includes 4 studs, nuts, and lock washers. Made in USA.

Availability: 3 In Stock!

Price: £4.58 (£5.50 Including vat at 20%)

1928-31 Water Pump mounting kit A-8501-MBM

Water Pump mounting kit 1928-31. Bolts that are machined to look like the original studs & nuts. Makes removal of the pump much easier with radiator on the car. Sold in sets of 4. Made in USA.

Availability: 3 In Stock!

Price: £7.49 (£8.99 Including vat at 20%)

Water pump cover Tan A-8501-COA

Water pump cover Tan. A very nice tight fitting leather cover for the water pump. This will prevent leaking water and grease from making the engine compartment look like a pig pen. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £10.42 (£12.50 Including vat at 20%)

Water pump cover Black A-8501-COB

Water pump cover Black. A very nice tight fitting leather cover for the water pump. This will prevent leaking water and grease from making the engine compartment look like a pig pen. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £10.42 (£12.50 Including vat at 20%)

Water pump cover Green A-8501-COG

Water pump cover Green. A very nice tight fitting leather cover for the water pump. This will prevent leaking water and grease from making the engine compartment look like a pig pen. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £10.42 (£12.50 Including vat at 20%)

1928-34 Water pump wrench A-8501-W

Water pump wrench 1928-34. A handy tool to tighten the water pump pack nut. One word of caution--adjust it very carefully and only a little at a time, just enough to stop the leak. Made in USA.

Availability: 7 In Stock!

Price: £2.49 (£2.99 Including vat at 20%)

Water pump Grease fitting 1928-31 A-8501-FIT

Water pump Grease fitting 1928-31. This special brass fitting with a screw on cap was used to grease the rear bushing assembly of the pump. The front used a regular grease fitting. Made in USA.

Availability: 5 In Stock!

Price: £3.33 (£3.99 Including vat at 20%)

1928-31 Water Pump Gasket A-8507

Water pump gasket 1928-31. Water pump gasket. Made in USA.

Availability: 17 In Stock!

Price: £0.83 (£1.00 Including vat at 20%)

1932-34 Model 'B' Water Pump Gasket B-8507

Model 'B' water pump gasket 1932-34. Used on the 1932-34 4-cyl water pumps. Made in USA.

Availability: 10 In Stock!

Price: £1.46 (£1.75 Including vat at 20%)

Fan mounting set 1928-31 A-8510-MS

Fan mounting set 1928-31. Castle nut, woddruff key and cotter pin for mounting the fan. Made in USA.

Availability: 4 In Stock!

Price: £1.66 (£1.99 Including vat at 20%)

Impeller As Original 1928-31 A-8501-I

Impeller As Original 1928-31. The impeller only for the pump. This is a press fit, no need for a pin. With impeller installed it should be 8-3/8" from base of impeller to end of shaft. The cut version is ground to slow down the flow rate. Use the cut version with reproduction radiators to eliminate coolant pumping out the overflow pipe. made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £9.17 (£11.00 Including vat at 20%)

Impeller Cut Version 1928-32 A-8501-IM

Impeller Cut Version 1928-32. The impeller only for the pump. This is a press fit, no need for a pin. With impeller installed it should be 8-3/8" from base of impeller to end of shaft. The cut version is ground to slow down the flow rate. Use the cut version with reproduction radiators to eliminate coolant pumping out the overflow pipe. made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £11.67 (£14.00 Including vat at 20%)

1928-31 Stainless Water Pump Shaft A-8511-SS

1928-31 Stainless Water Pump Shaft with the impeller already pressed on. Made in USA.

Availability: 1 In Stock!

Price: £28.33 (£34.00 Including vat at 20%)

1928-31 Oversize Stainless Water Pump Shaft A-8511-SSL

Oversize Stainless Pump shaft with impeller. This is the longer shaft with the impeller pressed on, you can use this if the old shaft has worn back into the head excessively. It is about 1/4" longer than normal.

Availability: 1 In Stock!

Price: £28.33 (£34.00 Including vat at 20%)

Water pump Shaft Steel 1928-31 A-8510

Water pumpshaft Steel 1928-31. The shaft only for the model A water pump. Our stainless shaft is made from 17-4PH stainless steel. A very hard and durable material that is magnetic, so don't be alarmed when your magnet sticks to the shaft.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £13.33 (£16.00 Including vat at 20%)

Water pump Shaft Stainless 1928-31 A-8510-SS

Water pumpshaft Stainless 1928-31. The shaft only for the model A water pump. Our stainless shaft is made from 17-4PH stainless steel. A very hard and durable material that is magnetic, so don't be alarmed when your magnet sticks to the shaft.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £20.00 (£24.00 Including vat at 20%)

Water pump Shaft Stainless 1928-31 A-8510-SSL

Water pumpshaft Stainless 1928-31. We also have this longer shaft in case the old shaft has worn back into the head excessively. It is about 1/4" longer.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £19.17 (£23.00 Including vat at 20%)

Thrust collar and washer 1928-31 A-8511-C

Thrust collar and washer 1928-31. A thin collar with a nylon wahser to install in the very front of the pump to control the end play. Keeps the fan from moving forward & backward. Made in USA.

Availability: 2 In Stock!

Price: £5.00 (£6.00 Including vat at 20%)

Impeller thrust washer Plain Steel 1928-31 A-8513-A

Impeller thrust washer Plain Steel 1928-31. Teardrop shaped washer that serves as a thrust washer between the pump housing and the impeller. Made in USA.

Availability: 3 In Stock!

Price: £0.83 (£1.00 Including vat at 20%)

Impeller thrust washer Stainless 1928-31 A-8513-SS

Impeller thrust washer Stainless 1928-31. Teardrop shaped washer that serves as a thrust washer between the pump housing and the impeller. Made in USA.

Availability: 2 In Stock!

Price: £2.08 (£2.50 Including vat at 20%)

Water pump Rear bushing assembly 1928-31 A-8520

Water pump Rear bushing assembly 1928-31. This pushes into the rear of the pump and the pack nut screws onto this piece. The water pump shaft rides in this bushing. Made in USA.

Availability: 1 In Stock!

Price: £10.00 (£12.00 Including vat at 20%)

Water pump Sealed brass rear bushing Bushing With Seals 1928-31 A-8520-B

Water pump Sealed brass rear bushing Bushing With Seals 1928-31. Same as the A-8520 except this is made of bearing bronze and has 2 internal seals to prevent coolant from passing between the shaft and the bushing. Made in USA.

Availability: Sorry, Out of Stock!

This item can be added to our next USA order!
(Price subject to change). Ordering Info!

Price: £23.33 (£28.00 Including vat at 20%)

Water pump Brass Nut 1928-29 A-8523

Water pump nut 1928-29 Brass. A very good quality US made water pump nut. This is a good heavy nut like the original.

Availability: 2 In Stock!

Price: £13.32 (£15.99 Including vat at 20%)

Water pump Zinc Nut 1930-31 A-8523-Z

Water pump nut 1930-31 Zinc. A very good quality US made water pump nut. This is a good heavy nut like the original.

Availability: 2 In Stock!

Price: £13.32 (£15.99 Including vat at 20%)

Water pump Seal kit 1928-31 A-8523-S

Water pump Seal kit 1928-31. Replacement seal and 'O' ring for the leakless pack nut.

Availability: 2 In Stock!

Price: £4.58 (£5.50 Including vat at 20%)

1928-29 Brass Leakless Pack Nut A-8523-LK

Leakless pack nut in brass for the 1928-29. Eliminate those problem water pump leaks with this tested and proven nut. This nut uses modern seals, and eliminates the old type packing. Comes in brass or zinc. 28-9's used brass, and the 30-1's used zinc. Made in USA.

Availability: 2 In Stock!

Price: £23.33 (£28.00 Including vat at 20%)

1930-31 Zinc Leakless Pack Nut A-8523-LKZ

Leakless pack nut Zinc 1930-31. Eliminate those problem water pump leaks with this tested and proven nut. This nut uses modern seals, and eliminates the old type packing. Comes in brass or zinc. 28-9's used brass, and the 30-1's used zinc. Made in USA.

Availability: 1 In Stock!

Price: £23.33 (£28.00 Including vat at 20%)

1928-31 Water Pump Graphite Packing A-8524-L

Water pump Graphite packing. Split Graphite lead type packing. Set of 2.

Availability: 5 In Stock!

Price: £5.42 (£6.50 Including vat at 20%)

1928-31 Water Pump Front Bearing Kit A-8530/35

The roller bearing and sleeve that the shaft rides in on the nose of the water pump.

Availability: 3 In Stock!

Price: £6.67 (£8.00 Including vat at 20%)

1928-31 Water Pump Modern Front Roller Bearing Kit A-8530/35-M

This set has a hardened sleeve which you press on your Water Pump shaft (your shaft must be .625 diam.). The matching internal needle bearings roll on the hardened sleeve. The tolerance on this set is better than the original giving a smoother roll and less vibration. If using an alternator, this bearing will withstand the additional load better than the stock bearing. This set is the same size as the original bearing and sleeve. Instructions included.

Availability: 3 In Stock!

Price: £7.50 (£9.00 Including vat at 20%)

Water Pump Cup Felt and Washer Set A-8540-BR

Water Pump Cup Felt and Washer Set A-8540-BR for the 1928-34 Four cylinder engine. Includes 2 felts, 2 cup washers and 2 flat washers. Soak felts in oil.

Availability: 4 In Stock!

Price: £3.33 (£4.00 Including vat at 20%)

1928-31 Two Blade Cast Aluminium Fan A-8600-A

Two blade cast aluminium fan 1928-31. We feel that this is the best deal on the market. This is the only U.S. made fan on the market today. One piece construction assures you that a fan blade isn't going to come loose from the hub. Made to look much like the originals. Made in USA.

Availability: 3 In Stock!

Price: £56.67 (£68.00 Including vat at 20%)

Plastic fan 1928-31 A-8600-P

Plastic fan 1928-31. This is a modern style fan for your model A. It uses a black plastic blade and a machined steel hub. The blade bolts to the hub using four bolts. Made in USA.

Availability: 1 In Stock!

Price: £74.17 (£89.00 Including vat at 20%)

1928-31 Fan knock off tool A-8600-KO

Fan knock off tool 1928-31. To remove the fan, thread this special nut on the end of the pump shaft. By holding the fan and giving this tool a few good hits with the hammer, it will brake the fan blade loose from the shaft. Made in USA.

Availability: 2 In Stock!

Price: £4.58 (£5.50 Including vat at 20%)

Ford Model A Parts | Cooling | Water Pump

**sRecentPrefix**				<br/><br/><div class="recenththeader"><input class="recenthtbuttonright" id="scrollbackrecent" type="button" value="    Next >>" onclick="ScrollBackRecent();"><input class="recenthtbuttonleft" id="scrollforwardrecent" type="button" value="<< Previous" onclick="ScrollForwardRecent();"><div style="text-align:center">Recently Viewed</div></div><br clear="all"/><table id="recenthtitem"> **sRecentImageRowPrefix**	<tr><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageItem**			<td class="recenthtitemimage"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" ><img border="0" width="75" src="_THUMB_" alt="_NAME_" /></a></td><td class="recenthtitemspacer" rowspan=4> </td> **sRecentImageRowSuffix**	</tr> **sRecentDescRowPrefix**	<tr> **sRecentDescItem**			<td class="recenthtitemdesc"><a _HREF_="_SSURL_?PRODREF=_PID_&NOLOGIN=1" >_NAME_</a></td> **sRecentDescRowSuffix**	 **sRecentPriceRowPrefix**	<tr> **sRecentPriceItem**			<td class="recenthtitemprice">_PRICE_</td> **sRecentPriceRowSuffix**	</tr> **sRecentDeleteRowPrefix**	<tr> **sRecentDeleteItem**		<td class="recenthtitemdelete"><a href="javascript:DeleteRecent('_PID_', true);"><img src="xit.jpg" border="0" /></a></td> **sRecentDeleteRowSuffix**	</tr> **sRecentSuffix**				</table> **sRecentEmptyList**

Best Sellers

Indicator lamp Pair 6 volt - INDCBU6