basket-icon

My Cart

Items: 
Value: 

Model A Ford

Front Spring

DVD - Put Bounce back in your Springs

DVD - Put Bounce back in your Springs

A 42 minute Video technical seminar for the Model A Ford Springs.
Presented by Alex Janke & Bob Grady of the Diablo A's Model A club in California USA.

How to tell a spring is worn while it is still on your car.
Properly using a spring spreader.
Safely unbundling spring leaves.
Repairing worn spring leaves.
Re-arching spring leaves in your garage.
Cleaning and lubricating spring leaves.
Reassembling spring with new bushings, shackles, and Zerk fittings.
This video series is not made by professionals but by Model A Ford enthiusiasts, therefore please excuse any poor sound or picture issues.

Watch a preview here

Availability:  2 In Stock!


Price: £19.99  (£23.98 Incl. vat)

1928-31 Front Spring Shackle Set A-5304

1928-31 Front Spring Shackle Set A-5304

Basic shackle kit for the front of your 1928-31 model A.

These are forged style shackles and come with bushings, end plates, castle nuts, and cotter pins. Grease fittings must be purchased seperately.

Bushings may need to be reamed after they have been pressed into the spring and perch.

Set of two shackles for one spring.
(Also fits 1928-29 AA truck front spring).

Availability:  5 In Stock!


Price: £69.50  (£83.40 Incl. vat)

1928-31 Front Spring Shackle Set A-5465-RE

1928-31 Front Spring Shackle Set A-5465-RE

USA made Model A front shackles.

Kit uses steel bushings as original and comes with modern grease fittings installed.

Bushings may need to be reamed after they have been pressed into the spring and perch.

Set of two shackles for one spring.

Availability:  3 In Stock!


Price: £58.50  (£70.20 Incl. vat)

Pete and Jakes Front Spring Shackle Set PJ-1051

Pete and Jakes Front Spring Shackle Set PJ-1051

Pete and Jakes super smooth hot rod front spring shackles.

Features gold iridite plated and Pete & Jakes black urethane bushings.

Fits 1 3/4" wide spring. 3/4" spring perch and 3/4" spring eye.

Set of two shackles.

Availability:  1 In Stock!


Price: £84.00  (£100.80 Incl. vat)

Pete and Jakes Spring Perch Set PJ-1042

Pete and Jakes Spring Perch Set PJ-1042

Pete and Jakes Spring Perch Set, ideal for your Super Bell I-Beam Axle.

Features extra long threads.
Stud fits any axle thickness (2 inch or 2 1/4 inch).
Allows use of bolt-on lower shock mount.
Spring Eye is 3/4 inch diameter.
Plain finish.

Availability:  1 In Stock!


Price: £120.00  (£144.00 Incl. vat)

Pete and Jakes Lower Shock Mount Set PJ-1067

Pete and Jakes Lower Shock Mount Set PJ-1067

Pete and Jakes lower shock mount Set, ideal for your Super Bell I-Beam Axle.

Will not fit stock spring perches.

Mounts below batwings or stock wishbone using the longer PJ-1042 perch set.

Plain finish.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £95.00  (£114.00 Incl. vat)

1928-31 Front Leaf Spring A-5310-A

1928-31 Front Leaf Spring A-5310-A

Front 10 leaf spring for the 1928-31 Model A Ford.

Note: Spring clamps are not included.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £395.00  (£474.00 Incl. vat)

1928-31 Front Spring Spreader A-5301

1928-31 Front Spring Spreader A-5301

Front spring spreader for the 1928-31 Model A.

A safe way to spread the front leaf spring for replacing shackles or simply removing spring from car.

Ends wrap around the spring so it can't slip off.

Made in USA.

Availability:  2 In Stock!


Price: £105.00  (£126.00 Incl. vat)

1928-31 Front Pannard Rod Kit A-5311

1928-31 Front Pannard Rod Kit A-5311

Front pannard bar for installation on the 1928-31 Model A Ford. No drilling required. Made in USA.

When a car is fitted with a transverse leaf spring, the axle can have left and right movement, due to the spring shackles.
A pannard rod ties your frame and axle together to stop left and right moverment, eliminating body roll and firm up the relation between the body and chassis.

Note: Cannot be used with our modern shock kit.



Availability:  2 In Stock!


Price: £200.00  (£240.00 Incl. vat)

1928-31 Perch - Shackle Bushing Set  A-3034-Q4

1928-31 Perch - Shackle Bushing Set A-3034-Q4

Front perch bushing set 1928-31.

These are the steel bushing that the spring shackle fits into. One in the perch, and the other in the leaf spring.

Set of 4.

Made in USA.

Availability:  4 In Stock!


Price: £5.50  (£6.60 Incl. vat)

1928-31 Spring Shackle Nut Set A-5300-N

1928-31 Spring Shackle Nut Set A-5300-N

Spring shackle nut set for the 1928-31 Model A Ford.

You can use this set of 8 castle nuts if your old shackles are in good condition.

Made in USA.

Availability:  6 In Stock!


Price: £11.00  (£13.20 Incl. vat)

1928-31 Spring Insulator Strip A-5300-IN

1928-31 Spring Insulator Strip A-5300-IN

When installing your spring on the model A, it is important to insulate the spring from the crossmember, to avoid all of those horrible creaks and groans.

Simply cut the middle to fit the centre bolt head, cover the insulator in grease, then sit it on top of the spring before installation.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £2.50  (£3.00 Incl. vat)

1928-32 Standard Front Spring Clamp Set  A-5330

1928-32 Standard Front Spring Clamp Set A-5330

Front spring clamps for the 1928-32 Ford.

Clamps with cad plated bolts and nuts.

Set of 2. Made in USA.

Availability:  12 In Stock!


Price: £14.50  (£17.40 Incl. vat)

1928-32 Oversize Front Spring Clamp Set  A-5330-X

1928-32 Oversize Front Spring Clamp Set A-5330-X

These spring clamps are made slightly taller than our standard A-5330 clamps.

These fit the aftermarket springs that have the hole for the spring clamp in the wrong leaf and require a taller spring clamp.

They fit springs that are roughly 1-29/64" thick where they mount. It's best to measure your spring to be safe.

Set of 2. Made in USA.

Availability:  6 In Stock!


Price: £15.00  (£18.00 Incl. vat)

1928-32 Front Spring 1.395

1928-32 Front Spring 1.395" Clamp Set A-5330-A

1928-32 Front spring 1.395" clamp set.

To figure out which clamp fits your spring, measure the thickness of your spring where the clamp goes and get the clamp that is closest to it.

These clamps all have the correctly shaped locating dimple like the originals.

Availability:  3 In Stock!


Price: £12.00  (£14.40 Incl. vat)

1928-32 Front Spring 1.060

1928-32 Front Spring 1.060" Clamp Set A-5330-AO

1928-32 Front spring 1.060" clamp set.

To figure out which clamp fits your spring, measure the thickness of your spring where the clamp goes and get the clamp that is closest to it.

These clamps all have the correctly shaped locating dimple like the originals.

Availability:  1 In Stock!


Price: £12.00  (£14.40 Incl. vat)

1928-31 Front Spring Clamp Bolt Set A-5330-MB

1928-31 Front Spring Clamp Bolt Set A-5330-MB

Front spring clip bolt set for the 1928-31 Model A.

Set consists of two hex headed bolts and square nuts to bolt the front spring clip.

Made in USA.

Availability:  5 In Stock!


Price: £4.00  (£4.80 Incl. vat)

1931 Spring Clamp Rivet  A-5332

1931 Spring Clamp Rivet A-5332

Spring clamp rivet. In early 31 Ford began riveting the spring clips to the springs.

This rivet is long enough to be used for either front or rear.

Availability:  8 In Stock!


Price: £2.50  (£3.00 Incl. vat)

1928-31 Front Spring Centre Bolt A-5345-F

1928-31 Front Spring Centre Bolt A-5345-F

Centre spring bolt Front 1928-31.

Square headed centre spring bolt with nut, to fit in the stock Model A front crossmember.

Made in USA.

Availability:  6 In Stock!


Price: £5.50  (£6.60 Incl. vat)

1928-30 Front Spring U-Bolt  A-5455-A

1928-30 Front Spring U-Bolt A-5455-A

1928-30 Front Spring U-Bolt.

Used from the start of production until February of 1930. The square top style U-bolt.

Originally these were a forging and stamped so the inside surface was flat other than the threads.

These are made out of round stock but fit and function just like the original forged bolts did.

Sold individually, 2 required. Made in USA

Availability:  3 In Stock!


Price: £15.00  (£18.00 Incl. vat)

1930-31 Front Spring U-Bolt A-5455-B

1930-31 Front Spring U-Bolt A-5455-B

1930-31 Front Spring U-Bolt to hold the front leaf spring to the cross member of the frame.

This is the round style that was used in 1930-31.

Made in USA.

Sold each.

Availability:  2 In Stock!


Price: £12.00  (£14.40 Incl. vat)

1928-30 Front Spring U-Bolt Set  A-5455-S

1928-30 Front Spring U-Bolt Set A-5455-S

1928-30 Front Spring U-Bolt set. Used from the start of production until February of 1930.

This is the square top style U-bolt. Set of two U bolts with nuts and cotter pins.

Made in USA

Availability:  2 In Stock!


Price: £39.50  (£47.40 Incl. vat)

1930-31 Front Spring U-Bolt A-5455-BE

1930-31 Front Spring U-Bolt A-5455-BE

An economy 1930-31 Front Spring U-Bolt to hold the front leaf spring to the cross member of the frame. Sold each.

Availability:  2 In Stock!


Price: £8.50  (£10.20 Incl. vat)

1932-34 Front Spring U-Bolt Kit 18-5455-S

1932-34 Front Spring U-Bolt Kit 18-5455-S

Front Spring U-Bolt Kit for the 1932-34 Ford V8.

These are 5 inch U bolts, that are slightly longer than the Model A version.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £33.00  (£39.60 Incl. vat)

1928-31 Front Spring U-Bolt Nut Set  A-5455-N

1928-31 Front Spring U-Bolt Nut Set A-5455-N

Special castle type nuts for the Model A Ford front spring U-bolts.

Set of 4.

Made in USA.

Availability:  2 In Stock!


Price: £10.50  (£12.60 Incl. vat)

1928-31 Front Spring Clip Bar A-5458

1928-31 Front Spring Clip Bar A-5458

Front spring clip bar 1928-31.

This is the bracket which holds the spring up into the cross member.

Availability:  4 In Stock!


Price: £17.00  (£20.40 Incl. vat)

1928-30 Starter Handle Crank Guide A-5461-A

1928-30 Starter Handle Crank Guide A-5461-A

Starting handle crank guide for the Model A Ford.

This style was used from the start of production in 1928 until February of 1930.

Availability:  2 In Stock!


Price: £27.00  (£32.40 Incl. vat)

1930-31 Starter Handle Crank Guide A-5461-B

1930-31 Starter Handle Crank Guide A-5461-B

Crank guide for the 1930-31 Model A Ford. From February 1930 until the end of production, this style crank guide was used with the rounded top style U-bolts.

These are not the best quality, as one of the locating pegs is formed poorly. Find an original if you can.

Availability:  2 In Stock!


Price: £22.50  (£27.00 Incl. vat)

1928-31 Spring Cover Set A-5310-CO

1928-31 Spring Cover Set A-5310-CO

Spring covers for the 1928-31 Model A Ford. An old accessory that will make your Ford ride like a Lincoln by oiling the springs. Keeps the dirt out.

Covers both the front and rear springs with felt oil strips. This is a quality cover with die stamped tabs just like Ford supplied.

Made in USA.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £120.00  (£144.00 Incl. vat)

1909-31 Shackle Bushing Reamer A-5303-R

1909-31 Shackle Bushing Reamer A-5303-R

Shackle bushing reamer for the 1909-1931 Fords.

Not a cheap adjustable reamer, this is an American made hand reamer for the job. Reams front & rear shackle bushings.

Made in USA.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £195.00  (£234.00 Incl. vat)

Shackle Bushing Drill Bit A-5303-D

Shackle Bushing Drill Bit A-5303-D

Shackle bushing drill 1/2" shank for the 1909-31 Fords.

An alternative to an expensive reamer. Drills your shackle bushings to proper bore.

Availability:  1 In Stock!


Price: £45.00  (£54.00 Incl. vat)

Recently Viewed