basket-icon

My Cart

Items: 
Value: 

Model A Ford

Front Axle

1928-31 King Pin Complete kit  A-3111

1928-31 King Pin Complete kit A-3111

King pin set for the 1928-31 Model A Ford.

A worn King pin is one of the greatest causes of a front end shimmy, and hard steering.

This King pin set replaces all wearing parts for both right and left side.

Made in USA.

Availability:  5 In Stock!


Price: 185.00  (222.00 Incl. vat)

1928-41 King Pin Parts Kit  A-3111-K

1928-41 King Pin Parts Kit A-3111-K

1928-41 King pin parts kit. This is all of the bushes and parts to repair the spindles, if you do not need the king pins themselves.

Fits Model A, American Ford V8 up to 1941 and Ford V8 Pilot.

Made in USA.

Availability:  6 In Stock!


Price: 63.50  (76.20 Incl. vat)

1928-31 Front Pannard Rod Kit A-5311

1928-31 Front Pannard Rod Kit A-5311

Front pannard bar for installation on the 1928-31 Model A Ford. No drilling required. Made in USA.

When a car is fitted with a transverse leaf spring, the axle can have left and right movement, due to the spring shackles.
A pannard rod ties your frame and axle together to stop left and right moverment, eliminating body roll and firm up the relation between the body and chassis.

Note: Cannot be used with our modern shock kit.



Availability:  2 In Stock!


Price: 200.00  (240.00 Incl. vat)

1928-31 Front Spring Perch  A-3030

1928-31 Front Spring Perch A-3030

Front spring perch 1928-31.

Very good quality and US made. Comes with bushing installed.

Made in USA.

Availability:  4 In Stock!


Price: 126.00  (151.20 Incl. vat)

1928-48 Front Perch Nut  A-3036

1928-48 Front Perch Nut A-3036

Front Perch nut 1928-48.

The special nut used to hold the perch in the front axle.

Made in USA.

Availability:  9 In Stock!


Price: 5.50  (6.60 Incl. vat)

1928-31 Perch Nut Shim Set A-3036-W

1928-31 Perch Nut Shim Set A-3036-W

Perch Nut Shim Set for the 1928-31 Model A Ford.

These front spring perch nuts shims are used to compensate for wear on the radius rod where the nut seats

The radius rods are often worn from years of neglect.  When this happens, the perch nut bottoms out on the shoulder of the perch instead of the radius rod.

Set of 2, Made in USA

Availability:  3 In Stock!


Price: 6.00  (7.20 Incl. vat)

1928-31 Perch - Shackle Bushing Set  A-3034-Q4

1928-31 Perch - Shackle Bushing Set A-3034-Q4

Front perch bushing set 1928-31.

These are the steel bushing that the spring shackle fits into. One in the perch, and the other in the leaf spring.

Set of 4.

Made in USA.

Availability:  5 In Stock!


Price: 5.50  (6.60 Incl. vat)

1928-48 King Pin Shim Set  A-3107

1928-48 King Pin Shim Set A-3107

1928-31 King pin shim set.

These are the thin .010 washer used to take up
any up and down play in the king pins.

Set of 4 shims.

Availability:  20 In Stock!


Price: 4.00  (4.80 Incl. vat)

1928-41 King Pin Bushing  A-3111-B

1928-41 King Pin Bushing A-3111-B

1928-41 King pin bushing. (Need 4 per car).

Availability:  10 In Stock!


Price: 7.00  (8.40 Incl. vat)

1928-41 King Pin Reamer  A-3111-R

1928-41 King Pin Reamer A-3111-R

King pin reamer for the 1928-41 vintage American Fords.

Special reamer that reams the bushings for the front spindle bolts.

This reamer makes the reamed holes perfectly in line.

Quality tool, Made in USA.

Availability:  1 In Stock!


Price: 275.00  (330.00 Incl. vat)

1928-48 King Pin Cup Washer  A-3120

1928-48 King Pin Cup Washer A-3120

1928-48 King pin Cup washer.

This washer goes upside down under the axle to retain the large A-3125 felt.

Availability:  10 In Stock!


Price: 2.00  (2.40 Incl. vat)

1928-31 Small King Pin Felt Set A-3121

1928-31 Small King Pin Felt Set A-3121

1928-31 small king pin felt set.

These are jammed inside the spindle bolt, and the front brake operating pin goes down through the middle of it.

Made in USA.

Availability:  8 In Stock!


Price: 2.00  (2.40 Incl. vat)

1928-48 Large King Pin Felt Set  A-3125

1928-48 Large King Pin Felt Set A-3125

1928-48 Large king pin felt.

This felt goes inside the lower end inside the cup washer.

Set of 2. Made in USA.

Availability:  13 In Stock!


Price: 2.00  (2.40 Incl. vat)

1929-48 King Pin Locking Bolt  A-3122/24

1929-48 King Pin Locking Bolt A-3122/24

1929-48 King pin Locking bolt/nut.

Special bolt, nut and lock washer that locks the spindle bolt in place in the axle.

Pin length 2 1/8" Sold each.

Availability:  2 In Stock!


Price: 9.50  (11.40 Incl. vat)

1928-48 Kingpin Bearing or Worm Bearing A-3123

1928-48 Kingpin Bearing or Worm Bearing A-3123

1928-48 Spindle Bearing.

Also used as the steering box Worm bearing on the early Model A 7 tooth steering box.

Two of these bearings are needed for the steering worm. (7 tooth sector)

Made in USA.

Availability:  14 In Stock!


Price: 7.50  (9.00 Incl. vat)

1928-31 King Pin Arm Nut  A-3132

1928-31 King Pin Arm Nut A-3132

King pin arm nut 1928-31.

This is the special nut that holds the King pins to the front axle.

Made in USA.

Availability:  6 In Stock!


Price: 7.00  (8.40 Incl. vat)

1930-34 AA - BB Truck King Pin Kit  AA-3111

1930-34 AA - BB Truck King Pin Kit AA-3111

Kingpin set for the 1930-34 AA and BB Truck.

CURRENTLY NOT AVAILABLE!


Price: 312.00  (374.40 Incl. vat)

DVD - Rebuilding the Model A Front Axle

DVD - Rebuilding the Model A Front Axle

A Video technical seminar for the Model A Ford front axle.

Features Alex Janke & Bob Grady, MAFCA Judges.
Let them guide you through the process of rebuilding the front end of your Model A.

Rebuilding the Front End video Contents:
Disassembly of all components
Inspection of parts to determine what can be reused and what must be replaced
Inspection of and straightening axle if necessary
Reassembly of all components
PLUS a BONUS Video showing How to Remove a Stuck Spring Perch
Watch as Bob and Alex show you how to remove, inspect and reuse the parts you can, while replacing the parts that should not be used again.
If you have ever tried to remove a spring perch from the axle only to discover it is rusted in place, or the nut won't budge, the 11-minute BONUS VIDEO on this DVD will show you how to solve those problems.

Watch a preview here

This video series is not made by professionals but by Model A Ford enthiusiasts, therefore please excuse any poor sound or picture issues. Running time 50 minutes.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: 19.99  (23.98 Incl. vat)

Recently Viewed