Vintage Model A Ford parts and spares
Start of Content
Parts ListingsFord Model A Parts1932-53 Ford V8Stromberg Speed PartsToolsOil Lube & PaintBooksDVD'sBrooklin Models

InformationHomeTestimonialsAbout UsThe Model A FordFord Model A HistoryFord Model A Body StylesO'Neill Vintage Ford infoGet Our NewsletterLinksHot Rod CartoonsContact Us404

New Products

1932-48 Fuel Pump with Glass Bowl 59A-9350-BD

1932-48 Fuel Pump with Glass Bowl 59A-9350-BD

99.95

Ford Flathead V8 fuel pump, With glass bowl. ...
find out more

1928-31 Premium Ignition Switch A-11575-BR

1928-31 Premium Ignition Switch A-11575-BR

69.95

Newly re-tooled, this is a top quality off-on style switch that ...
find out more

1948-52 Left Window Regulator 7C-8123201-A

1948-52 Left Window Regulator 7C-8123201-A

119.95

Left door window regulator for the 1948-52 Ford F series pickup ...
find out more

1939-40 Front Axle Bumper Set 91A-3020

1939-40 Front Axle Bumper Set 91A-3020

59.95

1939-40 American Ford V8 Front Rubber Axle Bumper set by Bob ...
find out more

1930-34 King Pin Bushing Set AA-3109-Q4

1930-34 King Pin Bushing Set AA-3109-Q4

62.95

1930-34 King Pin Bushing Set for the AA and BB truck. ...
find out more

1935-64 Right Tie Rod End 11A-3270-BD

1935-64 Right Tie Rod End 11A-3270-BD

33.95

Top quality Right Tie rod or drag link end for the ...
find out more

1928-53 Shok Liner Kit BD-5010-A

1928-53 Shok Liner Kit BD-5010-A

84.95

Top quality Shok Liner Kit for the 1928-53 American Ford V8. ...
find out more

V8 Pilot Kingpin Set E62A-3111

V8 Pilot Kingpin Set E62A-3111

149.95

At last! UK made kingpins for the 1948-52 English Ford ...
find out more

Model A Ford Compression Tester TL-35880-A

Model A Ford Compression Tester TL-35880-A

34.95

Draper compression tester, complete with three spark plug size adaptors. ...
find out more

1928-34 Burns Inlet Manifold A-9425-B1

1928-34 Burns Inlet Manifold A-9425-B1

359.00

Aluminum "BURNS" single carb intake manifold that will fit 1928-34 ...
find out more

1928-34 Burns Dual Inlet Manifold A-9425-B2

1928-34 Burns Dual Inlet Manifold A-9425-B2

399.00

Aluminum "BURNS" twin carb intake manifold that will fit 1928-34 ...
find out more

6V-12V Intelligent Battery Charger TL-33861

6V-12V Intelligent Battery Charger TL-33861

69.95

Intelligent battery charger 6V or 12V for workshop and home use. ...
find out more

1932-34 Leakless Water Pump Kit B-8591-SS

1932-34 Leakless Water Pump Kit B-8591-SS

129.95

Water pump rebuild kit for the 1932-34 Model B engine, with ...
find out more

Vintage Ford Vacuum Testing Kit TL-35881

Vintage Ford Vacuum Testing Kit TL-35881

22.95

Vacuum testing on our vintage Fords, gives us an incredible amount ...
find out more

Model A Ford

Bumpers

Ford Model A Parts | Body & Metalwork |  Bumpers

1930-31 Stainless Front Bumpers  A-17750-BS

1930-31 Stainless Front Bumpers A-17750-BS



1930-31 Front bumpers in Stainless Steel.

(Does not include clamps or fittings).



Price: 495.83  (595.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-29 Stainless Front bumpers A-17750-AS

1928-29 Stainless Front bumpers A-17750-AS



1928-29 Front bumpers in Stainless Steel.

Made in USA. (Does not include clamps or fittings).



Price: 495.83  (595.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-29 Rear bumpers Stainless A-17814-AS

1928-29 Rear bumpers Stainless A-17814-AS



1928-29 Rear bumpers in Stainless Steel.

Made in USA. (Does not include clamps or fittings).



Price: 470.83  (565.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1930-31 Stainless Rear Bumpers  A-17814-BS

1930-31 Stainless Rear Bumpers A-17814-BS



1930-31 Rear bumpers in Stainless Steel.

Made in USA. (Does not include clamps or fittings).



Price: 445.83  (535.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
1931 Slant windshield Rear bumpers Stainless A-17814-CSS

1931 Slant windshield Rear bumpers Stainless A-17814-CSS



Slant windshield bumpers 1931 Stainless.

The 1931 slant windshield 4-doors used a little different rear bumpers than the other cars.
They had more arch in them. 1931 only. (Does not include clamps or fittings).



Price: 470.83  (565.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-29 Front Bumper Bracket Set  A-17754/55-BR

1928-29 Front Bumper Bracket Set A-17754/55-BR



Front bumper brackets 1928-29.

The bracket that comes off of the front of the frame for holding the front bumpers on. Set of 2.



Price: 119.95  (143.94 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1930-31 Front Bumper Bracket Set  A-17754/55-E

1930-31 Front Bumper Bracket Set A-17754/55-E



Front bumper brackets 1930-31. The bracket that comes off of the front of the frame for holding the front bumpers on. Set of 2. Made in USA.



Price: 119.95  (143.94 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-29 Front Bumper Bracket Mounting bolt Set  A-17754-MB

1928-29 Front Bumper Bracket Mounting bolt Set A-17754-MB



Bumper Mounting bolt kit for the 1928-29 Model A.

This kit has the bolts, nuts and washers to mount the front bumper to the frame.

Made in USA.



Price: 7.46  (8.95 Incl. vat)



Availability:  3 In Stock!

Qty:     
1930-31 Front Splash Apron Bolt kit A-16528
1930-31 Front Splash Apron Bolt kit A-16528 - view 1

1930-31 Front Splash Apron Bolt kit A-16528



Hex Head version Bumper / Splash Apron Mounting bolt kit 1930-31.

This kit has the four long bolts, nuts and washers to mount the front bumper to the frame. The heads of these bolts were drilled and tapped to accept the screws that held the radiator apron on as well.

We have seen both hex and round on original cars. Made in USA.



Price: 28.29  (33.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1930-31 Front Bumper Splash Apron Bolt kit A-16527
1930-31 Front Bumper Splash Apron Bolt kit A-16527 - view 1

1930-31 Front Bumper Splash Apron Bolt kit A-16527



Round Head version Bumper / Splash Apron Mounting bolt kit 1930-31. This kit has the bolts, nuts and washers to mount the front bumper to the frame. The heads of these bolts were drilled and tapped to accept the screws that held the radiator apron on as well. We have seen both hex and round on original cars. Made in USA.




Price: 18.29  (21.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-30 Bumper Backing plate  A-17756-A

1928-30 Bumper Backing plate A-17756-A



Bumper Clamp Backing plate for the 1928-30.

This heavy steel backing plate is the early design. It was used from the beginning of production until around March of 1930.

Powder coated black! Made in USA.



Price: 9.13  (10.95 Incl. vat)



Availability:  4 In Stock!

Qty:     
1928-31 Bumper Backing Plate  A-17756-B

1928-31 Bumper Backing Plate A-17756-B



Bumper Clamp Backing plate for the 1928-31.

The later style stamped steel design with the diamond shape reinforcement stamped in it. Used from March of 1930 until the end of production, but will work on any year.

Powder coated black!



Price: 3.95  (4.74 Incl. vat)



Availability:  7 In Stock!

Qty:     
1928-30 Bumper Clamp A-17758-B

1928-30 Bumper Clamp A-17758-B



Bumper clamp 1928-30. These are top quality forged steel clamps.

There are cheaper clamps on the market, but they are a cast steel that break very easily.

These are thin just like the originals. Chrome plated. Made in USA.



Price: 26.63  (31.95 Incl. vat)



Availability:  10 In Stock!

Qty:     
1930-31 Bumper Clamp  A-17758-SS

1930-31 Bumper Clamp A-17758-SS



Bumper clamp 1930-31.

This is the style clamp that has a stainless clad over the clamp.

It was used from March of 1930 until the end of the production.

Made in USA.



Price: 24.00  (28.80 Incl. vat)



Availability:  5 In Stock!

Qty:     
1928-30 Canadian Bumper Clamp  A-17758-CAN

1928-30 Canadian Bumper Clamp A-17758-CAN



Canadian bumper clamp 1928-30. Used from June of 1928 until August of 1930. It was a chrome smooth faced clamp. Hold the bumpers to the bumper brackets.



Price: 66.50  (79.80 Incl. vat)



Availability:  1 In Stock!

Qty:     
1930-31 Canadian Bumper Clamp  A-17758-BCAN

1930-31 Canadian Bumper Clamp A-17758-BCAN



Canadian bumper clamp 1930-31.

Used from August of 1930 until the end of production. It was a chrome clamp that used a chrome carriage bolt to hold the bumpers to the bumper brackets.



Price: 19.50  (23.40 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Bumper Clamp Decal Sheet  A-17758-D

1928-31 Bumper Clamp Decal Sheet A-17758-D



Bumper clamp decals 1928-31.

These are a set of self adhesive stickers. Just cut 'em out and stick 'em on. Washington Blue.

One sheet is enough to do 4 large clamps. Made in USA.



Price: 6.50  (7.80 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Bumper Clamp Nut Set  A-17758-N

1928-31 Bumper Clamp Nut Set A-17758-N



Bumper clamp nut set 1928-31.

If you are using your original clamps, this kit has all of the nuts and lock washers for the 4 large clamps and the small center clamp.



Price: 4.13  (4.95 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Bumper End Spacer Set  A-17759

1928-31 Bumper End Spacer Set A-17759



Bumper end spacers 1928-31.

The rolled style spacers that go between the bumper bars at the ends. Come black powder coated.

Set of 2. Made in USA.



Price: 4.13  (4.95 Incl. vat)



Availability:  5 In Stock!

Qty:     
1928-31 S/S Bumper End Spacer Set  A-17759-SSS
1928-31 S/S Bumper End Spacer Set  A-17759-SSS - view 1

1928-31 S/S Bumper End Spacer Set A-17759-SSS



Stainless bumper spacer set for the 1928-31 model A bumper.

Polished to a high luster. Last a lifetime!

Set of 2.



Price: 11.63  (13.95 Incl. vat)



Availability:  12 In Stock!

Qty:     
1928 Bumper Centre Clamp  A-17762-A

1928 Bumper Centre Clamp A-17762-A



Bumper centre clamp 1928.

Used from the beginning of production until April of 1928. Comes with nut & lock washer. Clad style. Made in USA.



Price: 14.96  (17.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-29 Bumper Centre Clamp  A-17762-B

1928-29 Bumper Centre Clamp A-17762-B



Bumper centre clamp 1928-29.

Used from April of 1928 until May of 1929. Comes with nut & lock washer. Clad style.

Made in USA.



Price: 14.96  (17.95 Incl. vat)



Availability:  1 In Stock!

Qty:     
1929-31 Stainless Bumper Centre Clamp A-17762-S

1929-31 Stainless Bumper Centre Clamp A-17762-S



Bumper centre clamp 1929-31 in Stainless.

The oval style center clamp was used from November of 1929 until the end of production. Either the chrome or the stainless are correct. Only 1 used per car in middle of front bumper.

Made in USA.



Price: 12.46  (14.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1930-31 Stainless Bumper Centre Clamp A-17762-CAN

1930-31 Stainless Bumper Centre Clamp A-17762-CAN



Canadian Bumper centre clamp for the 1930-31 Model A.

This style of clamp was used from August of 1930 until the end of production.

Chrome plated steel with a spacer between the two bumper bars.



Price: 62.95  (75.54 Incl. vat)



Availability:  1 In Stock!

Qty:     
1930-31 Bumper Centre Clamp Decal  A-17762-D

1930-31 Bumper Centre Clamp Decal A-17762-D



Bumper Centre clamp decal 1930-31.

These stickers just stick on the clamp where you would normally paint them. For oval center bumper clamp only. Made in USA.



Price: 3.29  (3.95 Incl. vat)



Availability:  5 In Stock!

Qty:     
1928-29 Bumper backing plate  A-17765-A

1928-29 Bumper backing plate A-17765-A



Bumper center backing plate 1928-29. This is the smaller backing plate for the center bumper clamp. This wider style was used on the 28-9's that used the rouns style center clamp, but will work on all years. Made in USA.



Price: 3.00  (3.60 Incl. vat)



Availability:  2 In Stock!

Qty:     
1929-31 Bumper Centre Backing Plate  A-17765-B

1929-31 Bumper Centre Backing Plate A-17765-B



Bumper backing plate 1929-31. This is the small backing plate for the center bumper clamp.

This narrower style was used on the 29-31 A's that used the oval style center clamp, but will work on all years. Made in USA.



Price: 1.95  (2.34 Incl. vat)



Availability:  12 In Stock!

Qty:     
1930-31 Spare Wheel Bumper Guard  A-17806

1930-31 Spare Wheel Bumper Guard A-17806



Spare tyre guard for the 1930-31 Model A Ford when fitted with a rear mounted spare wheel.

This is a stainless steel bumper bar with brackets for installing between the rear bumpers. Made in USA.



Price: 224.17  (269.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
1930-31 Rear Bumper Bracket A-17798

1930-31 Rear Bumper Bracket A-17798



Bumper bracket 1930-31. This bracket is about 6" long, and holds the inside edge of the 30-1 rear bumpers to the rear bumper brackets. You will need two of these per car. Made in USA.



Price: 26.95  (32.34 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Bumper End Bolt Set  A-17834

1928-31 Bumper End Bolt Set A-17834



Cad plated bumper end bolt set for the 1928-31 Model A Ford.

Don't forget that Henry Ford painted them black.
Set of 2. Made in USA.



Price: 10.79  (12.95 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Bumper S/S End Bolt  A-17834-SS

1928-31 Bumper S/S End Bolt A-17834-SS



Stainless bumper end bolt for the 1928-31 Model A Ford.

Contains one stainless end bolt with nut and lock washer. The head of the bolt is polished. Last a lifetime!

Made in USA.



Price: 7.50  (9.00 Incl. vat)



Availability:  7 In Stock!

Qty:     
1928-31 Bumper Mounting Bolt Set  A-17770-MB

1928-31 Bumper Mounting Bolt Set A-17770-MB



Bumper mounting bolts 1928-31. The bolts, nuts and lock washers needed to install the rear bumper brackets and the cross brace. Made in USA.



Price: 9.13  (10.95 Incl. vat)



Availability:  10 In Stock!

Qty:     
1928-29 Cross Brace Bolt Set  A-17787-MB

1928-29 Cross Brace Bolt Set A-17787-MB



Bumper cross brace bolt set for the 1928-29 Model A.

The correct black oxide finish bolts that hold the 1928-29 cross brace on to the bumper brackets.

Made in USA.



Price: 12.46  (14.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1930 Cross Brace Bolt Set A-17785-MB

1930 Cross Brace Bolt Set A-17785-MB



Bumper cross brace bolt set for the early 1930.

The correct black oxide finish bolts that hold the 1930 cross brace on to the bumper brackets.



Price: 12.75  (15.30 Incl. vat)



Availability:  1 In Stock!

Qty:     
1931 Cross Brace Bolt Set A-17786-MB

1931 Cross Brace Bolt Set A-17786-MB



Bumper cross brace bolt set for the late 1931.

The correct black oxide finish bolts that hold the 1931 cross brace on to the bumper brackets.



Price: 12.75  (15.30 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-30 Bumper Cross Brace  A-17783-A

1928-30 Bumper Cross Brace A-17783-A



Bumper cross brace 1928-30. The early tubular style cross brace. This style was used from 28 until early 30. Powder coated black. Made in USA.



Price: 84.92  (101.90 Incl. vat)



Availability:  1 In Stock!

Qty:     
1930-31 Bumper Cross Brace  A-17783-BPC

1930-31 Bumper Cross Brace A-17783-BPC



Powder coated black version of the rear bumper cross brace on the 1930-31 Model A.

Ready to go! Made in USA.



Price: 65.00  (78.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-31 Rear Bumper Bracket Set A-17777-C

1928-31 Rear Bumper Bracket Set A-17777-C



Rear bumper brackets 1928-29 4 door Sedans & 1930-31 Phateon. These are the brackets that come off the frame for mounting the rear bumpers. The stands come on them. U.S.A.
Sorry, nothing available for the 1928-29 Tudor Sedan. Set of 2.



Price: 279.00  (334.80 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1930-31 Rear Bumper Bracket Set A-17777-D

1930-31 Rear Bumper Bracket Set A-17777-D



Rear bumper brackets 1930-31 2 door Sedan & Straight Windshield 4-door. These are the brackets that come off the frame for mounting the rear bumpers. The stands come on them. U.S.A.



Price: 278.00  (333.60 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Rear Bumper Bracket Set A-17777-E

1928-31 Rear Bumper Bracket Set A-17777-E



Rear bumper brackets Fits 1928-31 Coupes & Roadster. These are the brackets that come off the frame for mounting the rear bumpers. The stands come on them. U.S.A.
Sorry, nothing available for the 28-9 Tudor Sedan. Set of 2.



Price: 278.00  (333.60 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Bumper Stand Rivet  A-17777-RI

1928-31 Bumper Stand Rivet A-17777-RI



Bumper stand rivet 1928-31. 3/8" X 1-1/8" round headed steel rivet for riveting the bumper bracket to body stands to the bumper brackets. Made in USA.



Price: 1.50  (1.80 Incl. vat)



Availability:  10 In Stock!

Qty:     
1928-31 Rear bumper extension bracket set  A-17777-EX

1928-31 Rear bumper extension bracket set A-17777-EX



Rear bumper extension brackets 1928-31. When using a full bumper on the back, these bars will extend your bumper back further for the luggage rack. Made in USA.



Price: 345.00  (414.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Rear Bumper Bracket Stand  A-17830-A

1928-31 Rear Bumper Bracket Stand A-17830-A



Rear bumper bracket to body stand 1928-31 5-1/4" tall, Fits Coupes & Roadsters. This bracket supports the bumper brackets to the body. 2 required per car. If you are ordering new bumper brackets these will already be on them. Made in USA.



Price: 26.63  (31.95 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Rear Bumper Bracket Stand  A-17830-B

1928-31 Rear Bumper Bracket Stand A-17830-B



Rear bumper bracket to body stand 1928-31 4-1/2" tall. Fits Tudor Sedan & 4-door Touring Cars. This bracket supports the bumper brackets to the body. 2 required per car. If you are ordering new bumper brackets these will already be on them. Made in USA.



Price: 26.63  (31.95 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-29 Rear Bumper Bracket Stand  A-17830-C

1928-29 Rear Bumper Bracket Stand A-17830-C



Rear bumper bracket to body stand 1928-29 3" tall. Fits 4-door Sedans & Town Sedans. This bracket supports the bumper brackets to the body. 2 required per car. If you are ordering new bumper brackets these will already be on them. Made in USA.



Price: 26.63  (31.95 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     

Ford Model A Parts | Body & Metalwork |  Bumpers

Best Sellers

1928-31 Safety Fuse Kit A-11450-SF

1928-31 Safety Fuse Kit A-11450-SF

23.95

Every Model A should have one of these! Why burn up ...
find out more

Model A Ford Mechanics Handbook Vol 1

Model A Ford Mechanics Handbook Vol 1

45.00

Our Model A Ford Bible, is a 'Must Have' book for ...
find out more

Model A Ford Mechanics Handbook Vol 2

Model A Ford Mechanics Handbook Vol 2

37.50

Companion guide to Mechanics handbook Vol 1. Another 'Must Have' ...
find out more

Model A Ford Troubleshooting & Diagnostics

Model A Ford Troubleshooting & Diagnostics

32.50

The third mechanics handbook by Les Andrews and another 'Must Have' ...
find out more

Indicator Lamp Pair 12 volt - A-13310-LAMP12

Indicator Lamp Pair 12 volt  - A-13310-LAMP12

24.95

Set of 2 Indicator lamps with chrome metal body and short ...
find out more

The Beginners Guide to the Model A Ford Book

The Beginners Guide to the Model A Ford Book

39.95

Everything a beginner needs to know, from learning to start and ...
find out more

1928-48 Buick Style Finned Drum 1127B

1928-48 Buick Style Finned Drum 1127B

354.00

NEW Buick style, 45 fin brake drums. They come unpainted ...
find out more

1928-31 Distributor Points A-12199

1928-31 Distributor Points  A-12199

22.95

Original style distributor points for the 1928-31 Model A. Comes ...
find out more

Model A Baseball Hat A-18657-BCAB

Model A Baseball Hat A-18657-BCAB

9.95

Model A Ford Baseball hat, complete with Ford script and A ...
find out more

1928-34 Chrome Head Nut Cover Set A-6050-CO

1928-34 Chrome Head Nut Cover Set A-6050-CO

26.40

Set of 14 chrome Head nut covers for the 1928-34 ...
find out more


O'Neill Vintage Ford Newsletter signup




spacer
End of Content


Actinic Secure Web Payments
    All contents © O'Neill Group 2008-2020
pinstripe