Vintage Model A Ford parts and spares
Start of Content
Parts ListingsFord Model A Parts1932-53 Ford V8Stromberg Speed PartsPosies SpringsToolsOil Lube & PaintBooksDVD'sBrooklin Models

InformationHomeTestimonialsAbout UsThe Model A FordFord Model A HistoryFord Model A Body StylesO'Neill Vintage Ford infoGet Our NewsletterLinksHot Rod CartoonsContact Us404

New Products

1932-48 Fuel Pump with Glass Bowl 59A-9350-BD

1932-48 Fuel Pump with Glass Bowl 59A-9350-BD

99.95

Ford Flathead V8 fuel pump, With glass bowl. ...
find out more

1928-31 Premium Ignition Switch A-11575-BR

1928-31 Premium Ignition Switch A-11575-BR

69.95

Newly re-tooled, this is a top quality off-on style switch that ...
find out more

1928-48 Ignition Wire Loom Kit HR-12260-1-ABD

1928-48 Ignition Wire Loom Kit HR-12260-1-ABD

144.95

Top quality Ignition Wire Loom Kit for the 1928-48 American Ford ...
find out more

1939-40 Front Axle Bumper Set 91A-3020

1939-40 Front Axle Bumper Set 91A-3020

59.95

1939-40 American Ford V8 Front Rubber Axle Bumper set by Bob ...
find out more

1930-34 King Pin Bushing Set AA-3109-Q4

1930-34 King Pin Bushing Set AA-3109-Q4

62.95

1930-34 King Pin Bushing Set for the AA and BB truck. ...
find out more

1935-64 Right Tie Rod End 11A-3270-BD

1935-64 Right Tie Rod End 11A-3270-BD

33.95

Top quality Right Tie rod or drag link end for the ...
find out more

1928-53 Shok Liner Kit BD-5010-A

1928-53 Shok Liner Kit BD-5010-A

84.95

Top quality Shok Liner Kit for the 1928-53 American Ford V8. ...
find out more

V8 Pilot Kingpin Set E62A-3111

V8 Pilot Kingpin Set E62A-3111

149.95

At last! UK made kingpins for the 1948-52 English Ford ...
find out more

Model A Ford Compression Tester TL-35880-A

Model A Ford Compression Tester TL-35880-A

34.95

Draper compression tester, complete with three spark plug size adaptors. ...
find out more

1928-34 Burns Inlet Manifold A-9425-B1

1928-34 Burns Inlet Manifold A-9425-B1

359.00

Aluminum "BURNS" single carb intake manifold that will fit 1928-34 ...
find out more

1928-34 Burns Dual Inlet Manifold A-9425-B2

1928-34 Burns Dual Inlet Manifold A-9425-B2

399.00

Aluminum "BURNS" twin carb intake manifold that will fit 1928-34 ...
find out more

6V-12V Intelligent Battery Charger TL-33861

6V-12V Intelligent Battery Charger TL-33861

69.95

Intelligent battery charger 6V or 12V for workshop and home use. ...
find out more

1932-34 Leakless Water Pump Kit B-8591-SS

1932-34 Leakless Water Pump Kit B-8591-SS

129.95

Water pump rebuild kit for the 1932-34 Model B engine, with ...
find out more

Vintage Ford Vacuum Testing Kit TL-35881

Vintage Ford Vacuum Testing Kit TL-35881

22.95

Vacuum testing on our vintage Fords, gives us an incredible amount ...
find out more

Stromberg 97

Linkage Parts

Stromberg Speed Parts | Stromberg 97 Carburetor |  Linkage Parts

Stromberg 97 Linkage Parts
Stromberg Rocket Clip 9166K
Stromberg Rocket Clip 9166K - view 1Stromberg Rocket Clip 9166K - view 2Stromberg Rocket Clip 9166K - view 3

Stromberg Rocket Clip 9166K



Upgrade your throttle cable with the coolest end clip around!

With its stainless steel body and black painted clip, the Stromberg Rocket Clip works with all popular throttle cable kits.



Price: 9.13  (10.95 Incl. vat)



Availability:  6 In Stock!

Qty:     
Stromberg Lever Arm set - no swivel - 9090K

Stromberg Lever Arm set - no swivel - 9090K



Stromberg Carburetor - SuperLink Throttle arm with screw.

A new take on the traditional multi-carb linkage arm. Zinc die-cast with a modern H-beam section for strength, without weight, and a small reveal at the bottom edge for a period feel.

The countersunk stainless steel screw matches those on the carb and threads directly into the arm.



Price: 6.25  (7.50 Incl. vat)



Availability:  3 In Stock!

Qty:     
Stromberg Lever Arm set - with swivel - 9091K

Stromberg Lever Arm set - with swivel - 9091K



Stromberg Carburetor - SuperLink Throttle arm with screws and swivel.

Adds a stainless steel swivel, secured by a small e-clip on the back. The cross hole is sized for the typical 3/16th diameter linkage rod, which is secured by a black knurled-tip grub screw.



Price: 9.58  (11.50 Incl. vat)



Availability:  2 In Stock!

Qty:     
Stromberg Long Lever With Swivel - 9096K

Stromberg Long Lever With Swivel - 9096K



Like its shorter partners, 9096K is also zinc die-cast with a modern H-beam section for high strength without excess weight.

The countersunk stainless steel screw matches those on the carburetor and threads directly into the arm for serious grip. And the stainless steel swivel is secured by a small e-clip, with a 3/16th diameter cross hole for the linkage rod and a black knurled-tip set screw.

There are three adjustment/connecting holes in this lever so you can move the swivel to change your linkage leverage and pedal/throttle response.



Price: 12.92  (15.50 Incl. vat)



Availability:  1 In Stock!

Qty:     
Stromberg Long Lever With Kickdown Arm - 9096K-KD

Stromberg Long Lever With Kickdown Arm - 9096K-KD



Our 9096K long lever with additional auto-trans kickdown capability - a 1/4"-UNF thread at the bottom end takes a Lokar-style kickdown cable end.

Designed to be used in conjunction with our Cable Throttle Bracket (9136K), these arms are the foundation of all our 3×2 TwoStep progressive linkages (with kickdown), of course.

We also include a 3/32" roll pin, so it can be drilled and pinned to the shaft for more positive location if required.



Price: 12.92  (15.50 Incl. vat)



Availability:  1 In Stock!

Qty:     
Stromberg Cable Throttle Bracket - 9136K

Stromberg Cable Throttle Bracket - 9136K



Securely mounted between the carburetor and intake manifold, our Cable Throttle Bracket positions the cable for optimum, bind-free ‘pull’ on the Stromberg progressive linkage.

Compatible with most readily available hot rod cable throttle kits (e.g. Lokar).

A fixing hole is also provided for the small extension bracket supplied with most hot rod auto-trans kickdown cable kits. And a separate side arm provides a mount for a traditional return spring. Again, the 'Lokar' parts are recommended.



Price: 23.75  (28.50 Incl. vat)



Availability:  1 In Stock!

Qty:     
Stromberg Return Spring Set - 9154K

Stromberg Return Spring Set - 9154K



Our new stainless steel 'Snapback’ throttle return springs wrap around the end of the Stromberg throttle shaft and hook onto your linkage lever arm to snap your carburetors shut. Easy to install, they fit our 9090K and 9091K kits, and other carb lever arms. They're chemically blacked too, so they all but disappear from view. They're standard fitment with all Genuine Stromberg Two Step linkage kits.



Price: 7.08  (8.50 Incl. vat)



Availability:  2 In Stock!

Qty:     
Stromberg Premium 2X2 Carb Linkage - 9242P

Stromberg Premium 2X2 Carb Linkage - 9242P



A Premium 2x2 Super carburetor linkage with rod ends for positive action, for use with intake manifolds that put the carburetors 9-1/8 inches apart.
This Two Step linkage range combines clean, traditional looks with maximum leverage. Each kit comes pre-assembled and installs in just two simple steps, without the need for extended throttle shafts.



Price: 59.13  (70.95 Incl. vat)



Availability: Back Orders Taken!

Usually dispatched within 7 days.

Qty:     
Stromberg LH Linkage Bomb 9164K-L
Stromberg LH Linkage Bomb 9164K-L - view 1

Stromberg LH Linkage Bomb 9164K-L



Stromberg Carburetor LH Linkage Bomb.

Left hand 10-32 thread, Cool clips for Stromberg throttle and early Ford pedal linkage.

Fits most throttle cable kits and typical 1/4in throttle ball studs.



Price: 9.13  (10.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
Stromberg RH Linkage Bomb 9164K-R
Stromberg RH Linkage Bomb 9164K-R - view 1

Stromberg RH Linkage Bomb 9164K-R



Stromberg Carburetor RH Linkage Bomb.

Right hand 10-32 thread, Cool clips for Stromberg throttle and early Ford pedal linkage.

Fits most throttle cable kits and typical 1/4in throttle ball studs.



Price: 9.13  (10.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
Stromberg Linkage Ball Set 9168K
Stromberg Linkage Ball Set 9168K - view 1

Stromberg Linkage Ball Set 9168K



Stromberg Carburetor Linkage Ball Set.

Two threaded linkage ball studs with 7mm (0.275in) diameter balls, the same as Stromberg choke and throttle ball connections.



Price: 9.13  (10.95 Incl. vat)



Availability:  3 In Stock!

Qty:     
Stromberg 2X2 Carb Linkage - 9242S

Stromberg 2X2 Carb Linkage - 9242S



A Premium 2x2 Super carburetor linkage with rod ends for positive action, for use with intake manifolds that put the carburetors 9-1/8 inches apart.
This Two Step linkage range combines clean, traditional looks with maximum leverage. Each kit comes pre-assembled and installs in just two simple steps, without the need for extended throttle shafts.



Price: 29.96  (35.95 Incl. vat)



Availability: Back Orders Taken!

Usually dispatched within 7 days.

Qty:     
Stromberg 2X2 Carb Linkage - 9252S

Stromberg 2X2 Carb Linkage - 9252S



A Premium 2x2 Super carburetor linkage with rod ends for positive action, for use with intake manifolds that put the carburetors 9-5/8 inches apart.
This Two Step linkage range combines clean, traditional looks with maximum leverage. Each kit comes pre-assembled and installs in just two simple steps, without the need for extended throttle shafts.

Also fits 4 cylinder Burns twin carb manifold.



Price: 29.96  (35.95 Incl. vat)



Availability:  1 In Stock!

Qty:     
Stromberg 3X2 Progresive Linkage - 9243PRO
Stromberg 3X2 Progresive Linkage - 9243PRO - view 1

Stromberg 3X2 Progresive Linkage - 9243PRO



A high quality 3x2 progressive carburetor linkage designed for great looks and a positive action.

Use with intake manifolds that put each carburetor 4-9/16 inches apart.

Extended throttle shafts not required
Fits Offenhauser 1072 & 1074 & 1077 3x2 intakes
Fits Navarro Triple 3x2 intake



Price: 100.79  (120.95 Incl. vat)



Availability: Back Orders Taken!

Usually dispatched within 7 days.

Qty:     
Stromberg 2X2 Carb Linkage - 9241S
Stromberg 2X2 Carb Linkage - 9241S - view 1

Stromberg 2X2 Carb Linkage - 9241S



A competitively priced 2x2 carburetor linkage with Superlink levers. Use with intake manifolds that put the carburetors 4-3/4 inches apart. See above for typical manifold applications.
Designed and manufactured exclusively by Stromberg Carburetor, this linkage combines clean, traditional looks with maximum leverage. TwoStep linkage kits come pre-assembled and install in just two simple steps, without the need for extended throttle shafts. These kits are not a ‘one size fits all’ solution. Different intakes use different carb spacing, so we modelled every kit in 3D CAD and offer different kits for specific intakes. If you’re in doubt, simply measure your manifold spacing throttle shaft to throttle shaft.
4-3/4 inches from carb to carb
Extended throttle shafts not required
Fits Offenhauser 1090 & 1075 2x2 Regular intakes
Fits Edelbrock 1103 2x2 Slingshot intake
Fits Navarro 2x2 Regular intake
Fits Eddie Meyer 2x2 High-rise intake
Fits Thickstun PM-7 High-rise intake
Works with all Stromberg 9141 TwoStep fuel lines.





Price: 27.49  (32.99 Incl. vat)



Availability: Back Orders Taken!

Usually dispatched within 7 days.

Qty:     
Stromberg Chrome 2X2 Carb Linkage - 9241S-C
Stromberg Chrome 2X2 Carb Linkage - 9241S-C - view 1

Stromberg Chrome 2X2 Carb Linkage - 9241S-C



Show chrome/polished stainless steel finish linkage kit. Use with intake manifolds that put the carburetors 4-3/4 inches apart.
Designed and manufactured exclusively by Stromberg Carburetor, this linkage combines clean, traditional looks with maximum leverage. TwoStep linkage kits come pre-assembled and install in just two simple steps, without the need for extended throttle shafts. These kits are not a ‘one size fits all’ solution. Different intakes use different carb spacing, so we modelled every kit in 3D CAD and offer different kits for specific intakes. If you’re in doubt, simply measure your manifold spacing throttle shaft to throttle shaft.
4-3/4 inches from carb to carb
Extended throttle shafts not required
Fits Offenhauser 1090 & 1075 2x2 Regular intakes
Fits Edelbrock 1103 2x2 Slingshot intake
Fits Navarro 2x2 Regular intake
Fits Eddie Meyer 2x2 High-rise intake
Fits Thickstun PM-7 High-rise intake
Works with all Stromberg 9141 TwoStep fuel lines.




Price: 38.29  (45.95 Incl. vat)



Availability: Back Orders Taken!

Usually dispatched within 7 days.

Qty:     
Stromberg Premium Linkage. 4-3/4in - 9241P-CHR 2x2

Stromberg Premium Linkage. 4-3/4in - 9241P-CHR 2x2



A Premium, CHROME 2x2 carburetor linkage with rod ends for positive action (click more for applications and details). Use with intake manifolds that put the carburetors 4-3/4 inches apart. See above for typical manifold applications.

Designed and manufactured exclusively by Stromberg Carburetor, the TwoStep linkage range combines clean, traditional looks with maximum leverage. Each kit comes pre-assembled and installs in just two simple steps, without the need for extended throttle shafts. These kits are not a ‘one size fits all’ solution. Different intakes use different carb spacing, so we modeled every kit in 3D CAD and offer different kits for specific intakes. If you’re in doubt, simply measure your manifold spacing throttle shaft to throttle shaft.

4-3/4 inches from carb to carb. Show chrome/polished stainless steel finish. Extended throttle shafts not required. Fits Offenhauser 1090 & 1075 2x2 Regular intakes. Fits Edelbrock 1103 2x2 Slingshot intake.
Fits Navarro 2x2 Regular intake. Fits Eddie Meyer 2x2 High-rise intake. Fits Thickstun PM-7 High-rise intake. Works with all Stromberg 9141 TwoStep fuel lines.



Price: 63.29  (75.95 Incl. vat)



Availability: Back Orders Taken!

Usually dispatched within 7 days.

Qty:     

Stromberg Speed Parts | Stromberg 97 Carburetor |  Linkage Parts

Best Sellers

1928-31 Safety Fuse Kit A-11450-SF

1928-31 Safety Fuse Kit A-11450-SF

23.95

Every Model A should have one of these! Why burn up ...
find out more

Model A Ford Mechanics Handbook Vol 1

Model A Ford Mechanics Handbook Vol 1

45.00

Our Model A Ford Bible, is a 'Must Have' book for ...
find out more

Model A Ford Mechanics Handbook Vol 2

Model A Ford Mechanics Handbook Vol 2

37.50

Companion guide to Mechanics handbook Vol 1. Another 'Must Have' ...
find out more

Model A Ford Troubleshooting & Diagnostics

Model A Ford Troubleshooting & Diagnostics

32.50

The third mechanics handbook by Les Andrews and another 'Must Have' ...
find out more

Indicator Lamp Pair 12 volt - A-13310-LAMP12

Indicator Lamp Pair 12 volt  - A-13310-LAMP12

24.95

Set of 2 Indicator lamps with chrome metal body and short ...
find out more

The Beginners Guide to the Model A Ford Book

The Beginners Guide to the Model A Ford Book

39.95

Everything a beginner needs to know, from learning to start and ...
find out more

1928-48 Buick Style Finned Drum 1127B

1928-48 Buick Style Finned Drum 1127B

354.00

NEW Buick style, 45 fin brake drums. They come unpainted ...
find out more

1928-31 Distributor Points A-12199

1928-31 Distributor Points  A-12199

22.95

Original style distributor points for the 1928-31 Model A. Comes ...
find out more

Model A Baseball Hat A-18657-BCAB

Model A Baseball Hat A-18657-BCAB

9.95

Model A Ford Baseball hat, complete with Ford script and A ...
find out more

1928-34 Chrome Head Nut Cover Set A-6050-CO

1928-34 Chrome Head Nut Cover Set A-6050-CO

26.40

Set of 14 chrome Head nut covers for the 1928-34 ...
find out more


O'Neill Vintage Ford Newsletter signup




spacer
End of Content


Actinic Secure Web Payments
    All contents © O'Neill Group 2008-2020
pinstripe