Vintage Model A Ford parts and spares
Start of Content
Parts ListingsFord Model A1932-53 Ford V8Stromberg Speed PartsToolsOil Lube & PaintBooksDVD'sSeat SpringsBrooklin Models

InformationHomeTestimonialsAbout UsThe Model A FordFord Model A HistoryFord Model A Body StylesO'Neill Vintage Ford infoGet Our NewsletterLinksHot Rod CartoonsContact Us404

New Products

Model A Ford Compression Tester TL-35880-A

Model A Ford Compression Tester TL-35880-A

34.95

Draper compression tester, complete with three spark plug size adaptors. ...
find out more

V8 Pilot Kingpin Set E62A-3111

V8 Pilot Kingpin Set E62A-3111

149.95

At last! UK made kingpins for the 1948-52 English Ford ...
find out more

1928-34 Burns Inlet Manifold A-9425-B1

1928-34 Burns Inlet Manifold A-9425-B1

359.00

Aluminum "BURNS" single carb intake manifold that will fit 1928-34 ...
find out more

1928-34 Burns Dual Inlet Manifold A-9425-B2

1928-34 Burns Dual Inlet Manifold A-9425-B2

399.00

Aluminum "BURNS" twin carb intake manifold that will fit 1928-34 ...
find out more

1928-31 Burns Finned Valve Cover A-6011-B

1928-31 Burns Finned Valve Cover A-6011-B

162.00

Burns Finned Aluminium Valve cover for the 1928-31 Model A engine. ...
find out more

1932-34 Burns Finned Valve Cover B-6011-B

1932-34 Burns Finned Valve Cover B-6011-B

162.00

Burns Finned Aluminium Valve cover for the 1932-34 Model B engine. ...
find out more

6V-12V Intelligent Battery Charger TL-33861

6V-12V Intelligent Battery Charger TL-33861

69.95

Intelligent battery charger 6V or 12V for workshop and home use. ...
find out more

1932-34 Leakless Water Pump Kit B-8591-SS

1932-34 Leakless Water Pump Kit B-8591-SS

129.95

Water pump rebuild kit for the 1932-34 Model B engine, with ...
find out more

Vintage Ford Vacuum Testing Kit TL-35881

Vintage Ford Vacuum Testing Kit TL-35881

22.95

Vacuum testing on our vintage Fords, gives us an incredible amount ...
find out more

Model A Ford

Engine Tools

Ford Model A | Engine 24hp |  Engine Tools

Vintage Ford Vacuum Testing Kit TL-35881
Vintage Ford Vacuum Testing Kit TL-35881 - view 1

Vintage Ford Vacuum Testing Kit TL-35881

 

Vacuum testing on our vintage Fords, gives us an incredible amount of information about our engines, including air leaks, incorrect valve timing, engine misfires, low engine compression, advanced/retarded ignition, air/fuel ratio, balancing carburettors and fuel economy.

Connect to your inlet manifold vacuum take off point, with this dual reading pressure gauge 0-10psi/0-0.7BAR, fitted with a heavy duty rubber protector.

Supplied in a plastic storage case.





Price: 19.13  (22.95 Incl. vat)



Availability:  1 In Stock!

Qty:     
Model A Ford Compression Tester TL-35880-A
Model A Ford Compression Tester TL-35880-A - view 1

Model A Ford Compression Tester TL-35880-A

 

Draper compression tester, complete with three spark plug size adaptors.

Fits sizes 14mm, 18mm, plus 7/8" adaptor for Model A or Model B four cylinder engines.

The dual reading pressure gauge 0-300psi/0-20BAR is fitted with a heavy duty rubber protector. Fitted with a spring-loaded pressure relief valve and integrated Schrader one-way valve system.

Supplied in a plastic storage case.



Price: 29.13  (34.95 Incl. vat)



Availability:  3 In Stock!

Qty:     
Model T Ford Compression Tester TL-35880-T
Model T Ford Compression Tester TL-35880-T - view 1

Model T Ford Compression Tester TL-35880-T

 

Draper compression tester, complete with three spark plug size adaptors.

Fits sizes 14mm, 18mm, plus pipe thread adaptor for Model T Ford engines.

The dual reading pressure gauge 0-300psi/0-20BAR is fitted with a heavy duty rubber protector. Fitted with a spring-loaded pressure relief valve and integrated Schrader one-way valve system.

Supplied in a plastic storage case.



Price: 29.13  (34.95 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-34 Engine Turning Tool A-6321

1928-34 Engine Turning Tool A-6321



This really handy tool bolts to the rear flange of the crankshaft using your original flywheel bolts. The center of this plate has a hex nut welded to it so you can turn the motor with a socket and ratchet or a wrench. U.S.A.



Price: 15.00  (18.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-31 Camshaft Nut Tool  A-6251

1928-31 Camshaft Nut Tool A-6251



Special tool for removing and installing the A-6259 cam nut on the Model A Ford engine. Made in USA.


Price: 26.63  (31.95 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Complete Timing kit  Kit A-6252

1928-31 Complete Timing kit Kit A-6252



Timing kit 1928-31 Complete Kit. Kit comes with everythng you see plus instructions.

This kit allows you to get your timing right n the money using a timing light. Once timing is set, there is no longer any need to set timing using a pin. Also, so you can see how many degrees you are moving cam.Made in USA. "Genuine Nu-Rex".



Price: 35.42  (42.50 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-31 Pulley Ratchet Nut Wrench  A-6320

1928-31 Pulley Ratchet Nut Wrench A-6320

 

Ratchet nut wrench for the model A and B engine.

This is a lighter duty version with a 6 point head.

Ideal for keeping in the car, in case you need to turn the engine over to chech the points and timing.



Price: 49.96  (59.95 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-34 Pulley Ratchet Nut Wrench  A-6319-T

1928-34 Pulley Ratchet Nut Wrench A-6319-T



Ratchet nut wrench for the 1928-34 model A and B engines.

Great when setting the timing, instead of the starting handle and makes the job easier, since you can rotate the crankshaft in both directions, helps to find top dead center.

This one is more heavy duty that the A-6320 and has a 12 point head. Ideal for your toolbox.



Price: 58.29  (69.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-34 Stud Thread Repair Kit A-6065-RK

1928-34 Stud Thread Repair Kit A-6065-RK



Head stud thread repair kit 1928-34.

This kit gives you everything you need except a drill bit for reapiring head and manifold stud threads in the block.

Made in USA.



Price: 47.46  (56.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-34 Stud Thread Repair Drill A-6065-RKD

1928-34 Stud Thread Repair Drill A-6065-RKD



This is the replacement drill bit for the A-5065-RK stud thread repair kit.



Price: 14.95  (17.94 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1909-1934 Head Stud Drill Out Guide A-6063

1909-1934 Head Stud Drill Out Guide A-6063



This lower cost handy tool bolts to the head surface of the block and provides a drill guide bushing and long drill bit for getting your pilot hole centered on the broken stud.



Price: 45.00  (54.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
Repair Stud Tap A-6066-TAP

Repair Stud Tap A-6066-TAP



Repair Stud Tap A-6066-TAP. This is the tap needed when using the oversized head repair studs. 1/2" - 13.



Price: 17.50  (21.00 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-34 Repair Stud Drill A-6065-DRBR

1928-34 Repair Stud Drill A-6065-DRBR



This is the special 27/64" drill bit for the head repair studs A-6066-RK, A-6066-CRK and A-6067-RK.

You will also need the special tap A-6066-TAP.



Price: 14.95  (17.94 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Head Nut Torque Tool A-6064-T

1928-31 Head Nut Torque Tool A-6064-T



Head nut torque tool adapter 1928-31. Special tool allows you to torque the head nut that is beside the distributor.

You normally have to remove the distributor to get a torque wrench on that nut. Made in USA.



Price: 39.58  (47.50 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-34 Engine Lift Eye A-17022

1928-34 Engine Lift Eye A-17022



Engine Lift Eye for the 1928-34 four cylinder engine. Threads into the spark plug hole in original style cylinder head and has a large eyelet for a chain hook to hook through. Can also be helpful in removing a stuck head. Made in USA.



Price: 14.96  (17.95 Incl. vat)



Availability:  4 In Stock!

Qty:     
1928-34 Cylinder Head Puller A-6010-P

1928-34 Cylinder Head Puller A-6010-P



Head puller for the 1928-34 Model A and Model B Engine. Attaches to head with special hardware that screws into the spark plug holes and lifts the head from the block. Can also be used for lifting the engine. Made in USA.



Price: 119.94  (143.93 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-34 Sump Installation Guide Set A-6782

1928-34 Sump Installation Guide Set A-6782



If you are fitting your sump with the engine still in the car, these plastic guides save a lot of headaches. They thread into the 4 corners of the block to make installing the oil pan and gaskets easier.

Slide the gasket up over the guide and then the oil pan. Guides will hold the pan/gaskets in place while you thread the mounting bolts into the block.

Note: Use two sets to make the job even easier.



Price: 11.25  (13.50 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Flywheel Wobble Gauge  A-6381-W

1928-31 Flywheel Wobble Gauge A-6381-W



Flywheel wobble gauge for the 1928-31 Model A Ford. This is the smaller kit is used to determine if the flywheel is seated properly on the crankshaft, or even if the flywheel is warped. both of these areas can cause vibration if not properly done. Made in USA.



Price: 25.00  (30.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-31 Flywheel gauge  A-6381

1928-31 Flywheel gauge A-6381



Flywheel gauge 1928-31. The large bracket in this kit bolts to the flywheel. The flywheel is then turned so you can be sure the flywheel housing is correctly shimmed against the block. The small bracket is used to determine if the flywheel is seated properly on the crankshaft. both of these areas can cause vibration if not properly done. Made in USA.


Price: 39.00  (46.80 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-34 Valve Guide Tool  A-6500-VGT

1928-34 Valve Guide Tool A-6500-VGT



Valve guide removal tool for the 1928-34 model A and model B engine.

This driver is a reproduction of a K.R. Wilson tool. It provides easy removal of the most stubborn guides.



Price: 29.75  (35.70 Incl. vat)



Availability:  2 In Stock!

Qty:     
1909-31 Valve Spring Tool  A-6513-T

1909-31 Valve Spring Tool A-6513-T



Valve spring tool 1909-31. Makes collapsing the valve springs a breeze! The hook hooks over the manifold stud and acts as a pivot to pry the spring upward in order to install the keeper. Made in USA.


Price: 45.00  (54.00 Incl. vat)



Availability:  2 In Stock!

Qty:     

Ford Model A | Engine 24hp |  Engine Tools

Best Sellers

1928-31 Safety Fuse Kit A-11450-SF

1928-31 Safety Fuse Kit A-11450-SF

23.95

Every Model A should have one of these! Why burn up ...
find out more

Model A Ford Mechanics Handbook Vol 1

Model A Ford Mechanics Handbook Vol 1

45.00

A 'Must Have' book for model A owners! Now Signed ...
find out more

1928-31 Master Cylinder Battery Box A-2001-BB

1928-31 Master Cylinder Battery Box A-2001-BB

360.00

This Model A battery box/master cylinder assembly is perfect for a ...
find out more

Indicator Lamp Pair 12 volt - A-13310-LAMP12

Indicator Lamp Pair 12 volt  - A-13310-LAMP12

24.95

Set of 2 Indicator lamps with chrome metal body and short ...
find out more

Model A Ford Mechanics Handbook Vol 2

Model A Ford Mechanics Handbook Vol 2

37.50

Now Signed by the author for us! Companion guide to ...
find out more

Model A Ford Troubleshooting & Diagnostics

Model A Ford Troubleshooting & Diagnostics

32.50

Another 'Must Have' book for your library! Now Signed ...
find out more

1928-31 Standard Condenser A-12300-SP

1928-31 Standard Condenser A-12300-SP

11.95

1928-31 Condenser for the standard original style model A distributor. ...
find out more

1928-48 Buick Style Finned Drum 1127B

1928-48 Buick Style Finned Drum 1127B

354.00

NEW Buick style, 45 fin brake drums. They come unpainted ...
find out more

1928-31 Distributor Points A-12199

1928-31 Distributor Points  A-12199

22.95

Original style distributor points for the 1928-31 Model A. Comes ...
find out more

Model A Baseball Hat A-18657-BCAB

Model A Baseball Hat A-18657-BCAB

9.95

Model A Ford Baseball hat, complete with Ford script and A ...
find out more

1928-34 Chrome Head Nut Cover Set A-6050-CO

1928-34 Chrome Head Nut Cover Set A-6050-CO

26.40

Set of 14 chrome Head nut covers for the 1928-34 ...
find out more


O'Neill Vintage Ford Newsletter signup



Stromberg Carburetor


spacer
End of Content