basket-icon

My Cart

Items: 
Value: 

Ford Flathead V8

V8 Carburetor

Lucas Ethanol Fuel Stabilizer E62A-40576

Lucas Ethanol Fuel Stabilizer E62A-40576

Safeguard Ethanol Fuel Conditioner. One bottle treats up to 302 litres of fuel.

Lucas Safeguard Ethanol Fuel Conditioner with Stabilisers was developed to specifically address issues associated with using ethanol based fuels.

This applies to E10, E15, E85, pure ethanol and any mixtures in between including petrol/gasoline.

This Lucas product is completely soluble in all ethanol fuels and will not harm filters. Lucas Safeguard Ethanol Fuel Conditioner with Stabilisers contains effective additives to prevent rust and corrosion associated with the use of ethanol fuels.

***UK DELIVERY ONLY*** We cannot ship these to Europe!

Availability:  2 In Stock!


Price: 10.79  (12.94 Incl. vat)

1932-48 Accelerator Spring 48-9737

1932-48 Accelerator Spring 48-9737

Accelerator Spring for the 1932-48 American Ford V8.

Availability:  2 In Stock!


Price: 17.00  (20.40 Incl. vat)

1935-48 Accelerator Pedal Rod 48-9727

1935-48 Accelerator Pedal Rod 48-9727

This is the accelerator pedal rod that goes from the throttle pedal to the linkage on the firewall.

Fits 1935-48 American Ford V8.

Availability:  3 In Stock!


Price: 12.50  (15.00 Incl. vat)

1938-56 Carburetor Rebuild Kit 59A-9590

1938-56 Carburetor Rebuild Kit 59A-9590

Carburetor Rebuild Kit Including gaskets for the flathead V8 2bbl Ford & Holley Carburetor.

Availability:  3 In Stock!


Price: 47.00  (56.40 Incl. vat)

1941-51 Carburetor Rebuild Kit 7HA-9590

1941-51 Carburetor Rebuild Kit 7HA-9590

Carburetor Rebuild Kit for the 1941-51 American Ford 6 cylinder.

Only for the Holley 1 Barrel - 6 Cylinder G Or H Carb.

Availability:  3 In Stock!


Price: 49.00  (58.80 Incl. vat)

1933-38 Std Carburetor Rebuild Kit 67-9590

1933-38 Std Carburetor Rebuild Kit 67-9590

1933-38 standard carburetor rebuild kit Including gaskets, for the Stromberg Flathead V8 carb.

Availability:  2 In Stock!


Price: 30.00  (36.00 Incl. vat)

Stromberg Carburetor Premium Service Kit for 97 / 40 / 48 - 9590K-97

Stromberg Carburetor Premium Service Kit for 97 / 40 / 48 - 9590K-97

Stromberg Carburetor - Premium Service Kit kit for Stromberg 97, 48 and 40.

Full gasket kit, ‘No-stick’ S-jet inlet valve, Accelerator pump check valve, 2 idle mixture screws and springs, Full accelerator pump kit, Installation sheet and float gauge

Availability:  5 In Stock!


Price: 36.63  (43.95 Incl. vat)

Stromberg Carburetor Premium Service Kit for 81 - 9590K-81

Stromberg Carburetor Premium Service Kit for 81 - 9590K-81

Stromberg Carburetor - Premium Service Kit for Stromberg 81

Full gasket kit, ‘No-stick’ S-jet inlet valve, Accelerator pump check valve, 2 idle mixture screws and springs, full 81-size accelerator pump kit, installation sheet and float gauge

Availability:  5 In Stock!


Price: 38.96  (46.75 Incl. vat)

1933-38 Stromberg Phenolic Spacer Kit HR-9447-A

1933-38 Stromberg Phenolic Spacer Kit HR-9447-A

This ½" thick, fuel-resistant phenolic spacer will help keep your carburetor cool and prevent vapor lock.

Kit includes: 1 spacer, 2 gaskets and 3 studs.

Fits Stromberg 3-bolt Carburetor.

Premium product by Bob Drake Reproductions.

Availability:  4 In Stock!


Price: 46.00  (55.20 Incl. vat)

1938-53  Ford - Holley Phenolic Spacer HR-9447-B

1938-53 Ford - Holley Phenolic Spacer HR-9447-B

This ½" thick, fuel-resistant phenolic spacer will help keep your carburetor cool and prevent vapor lock.

Kit includes: 1 spacer, 2 gaskets and 3 studs.

Fits Ford / Holley 3-bolt Carburetor.

Premium product by Bob Drake Reproductions.

Availability:  7 In Stock!


Price: 46.00  (55.20 Incl. vat)

1938-55 Carburetor Float 78-9550

1938-55 Carburetor Float 78-9550

Carburetor float for the 1938-55 American Ford V8.

Fits Ford and Holley carb.

Availability:  3 In Stock!


Price: 30.00  (36.00 Incl. vat)

1932-56 Carburetor Power Valve 78-9904

1932-56 Carburetor Power Valve 78-9904

Carburetor Power Valve for the 1932-56 Ford and Holley carb.

This power valve fits early Ford & Holley 94/AA 2bbl carbs, along with the early 1957 up to 1963 Autolite 2 and 4bbl carburetor models 2100 & 4100.

It is an improved design which has been re-engineered with an ethanol resistant fluorocarbon diaphragm.

Made in USA

Availability:  2 In Stock!


Price: 20.00  (24.00 Incl. vat)

1938-53 Carb Accelerator Pump  78-9631

1938-53 Carb Accelerator Pump 78-9631

Accelerator Pump Piston for the 1938-53 V8 cars with Ford or Holley carb.

Availability:  1 In Stock!


Price: 17.50  (21.00 Incl. vat)

1938-53 Carb Accelerator Pump  78-9631-USA

1938-53 Carb Accelerator Pump 78-9631-USA

High quality USA made Accelerator Pump Piston for the 1938-53 V8 cars with Ford or Holley carb.

This one has the original style leather seal, to handle modern fuels better.

Availability:  2 In Stock!


Price: 19.50  (23.40 Incl. vat)

Rubber Covered Fuel Hose E62A-451-5081

Rubber Covered Fuel Hose E62A-451-5081

Rubber covered 5/16" ID (8mm) fuel hose, ideal for multi carb setup.

1 metre length, complete with two clips.

Availability:  20 In Stock!


Price: 5.50  (6.60 Incl. vat)

1939-56 Carb Gasket 40-9447

1939-56 Carb Gasket 40-9447

Carburetor base gasket for the Ford Flathead V8 with Ford or Holley Carb

Availability:  7 In Stock!


Price: 4.00  (4.80 Incl. vat)

1933-38 Carb Gasket 40-9447-S

1933-38 Carb Gasket 40-9447-S

Carburetor base gasket for the Ford Flathead V8 with Stromberg carb.

Availability:  6 In Stock!


Price: 3.00  (3.60 Incl. vat)

1939-56 Carb Gasket Set 21A-9502

1939-56 Carb Gasket Set 21A-9502

Gasket Set for Holley Carb on the 38-48 V8 passenger car and 38-47 pickup. (excluding 60hp engine).

Availability:  4 In Stock!


Price: 15.00  (18.00 Incl. vat)

Stromberg Carburetor Full Gasket Kit - 9447K

Stromberg Carburetor Full Gasket Kit - 9447K

Stromberg Carburetor - Full gasket kit for 97 / 48 / 40

Three main gaskets (non-paper), plus felt gasket for accelerator pump, and ring gaskets for power jet, inlet valve and drain plugs

Availability:  2 In Stock!


Price: 7.71  (9.25 Incl. vat)

1932 Model B Carb Gasket Set  A-9502-B

1932 Model B Carb Gasket Set A-9502-B

Model 'B' Carb Gasket Set.

If your carb has the later 1932 style carb, this is the gasket kit for that carb.

Made in USA

Availability:  5 In Stock!


Price: 5.00  (6.00 Incl. vat)

1932-34 Model B Carb Basic Rebuild Kit  B-9595

1932-34 Model B Carb Basic Rebuild Kit B-9595

1932 Model 'B' Carb Kit.

All the basic parts for rebuilding an original cast iron zenith model B carburetor.

(Float valve not included).

Availability:  5 In Stock!


Price: 125.00  (150.00 Incl. vat)

1932-34 Model B Zenith Carb Float Valve  B-9564

1932-34 Model B Zenith Carb Float Valve B-9564

Zenith needle/Seat for the 1932-34 model B Zenith Carb .

This is the valve that the float pushes against to cut the flow of gas.

Availability:  2 In Stock!


Price: 35.00  (42.00 Incl. vat)

1932-34 Model B Carb Float B-9550

1932-34 Model B Carb Float B-9550

Model B Carb Float as used on 1932-34 Zenith carburetors.

These were known as the B-2 style carburetor float, the earlier style was more barrel shaped.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: 42.00  (50.40 Incl. vat)

Carburetor Air Scoop Filter HR-9600-SCF

Carburetor Air Scoop Filter HR-9600-SCF

Finally, a convenient & good-looking way to add filtration to your carb scoop.

This is a fully washable element.

CURRENTLY NOT AVAILABLE!


Price: 20.00  (24.00 Incl. vat)

1951-52 Choke Knob 1C-9703-A

1951-52 Choke Knob 1C-9703-A

Choke knob for the 1951-52 Ford F1 pickup truck.

Availability:  1 In Stock!


Price: 12.00  (14.40 Incl. vat)

1932-53 Universal Choke Cable 7C-9700-U

1932-53 Universal Choke Cable 7C-9700-U

Universal choke cable.

Suitable for many custom applications.

Availability:  3 In Stock!


Price: 25.50  (30.60 Incl. vat)

1932-69 Chrome Air Cleaner HR-9600

1932-69 Chrome Air Cleaner HR-9600

Chrome Louvered style Hot Rod Air Cleaner.

Fits 2 Barrel Carb with 2- 5/8" Throat.

Element included.

Availability:  10 In Stock!


Price: 34.00  (40.80 Incl. vat)

Hot Rod Air Filter Element HR-9600-E

Hot Rod Air Filter Element HR-9600-E

Paper type air filter element for the HR-9600 chrome air filter and many other hot rod air cleaners.
.
Size: OD 96mm, ID 70mm, Depth 54mm

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: 8.00  (9.60 Incl. vat)

Stromberg Carburetor

Stromberg Carburetor


Need a new Stromberg Carb or service parts?

Click the image to go to the Stromberg Carburetor Section
or Click Here!

Recently Viewed