basket-icon

My Cart

Items: 
Value: 

Model A Ford

Distributor - Electronic Ignition

12V Electronic Ignition Kit A-11574-FSI12

12V Electronic Ignition Kit A-11574-FSI12

The FSI 12V negative earth Electronic Ignition Conversion Kit for the stock Model A Ford distributor.

Features the PerTronix Electronic Ignitor and replaces the upper plate in your stock Model A distributor. (the lower plate is no longer needed).

The wires are fed through a new spring conduit, included, that is very similar to the old pop-out cable, to maintain the stock appearance.
a 3 ohm coil is required with this kit.

This set up is discussed in detail in our Model A Mechanics Handbook volume 2.

Availability:  2 In Stock!


Price: £295.00  (£354.00 Incl. vat)

6V Electronic Ignition Kit A-11574-FSI6

6V Electronic Ignition Kit A-11574-FSI6

The FSI 6V positive earth Electronic Ignition Conversion Kit for the stock Model A Ford distributor.

Features the PerTronix Electronic Ignitor and replaces the upper plate in your stock Model A distributor. (the lower plate is no longer needed).

The wires are fed through a new spring conduit, included, that is very similar to the old pop-out cable, to maintain the stock appearance.
a 1.5 ohm coil is required with this kit.

This set up is discussed in detail in our Model A Mechanics Handbook volume 2.

Availability:  2 In Stock!


Price: £295.00  (£354.00 Incl. vat)

12v FSI Electronic Distributor A-12100-FSI12-ADV16

12v FSI Electronic Distributor A-12100-FSI12-ADV16

For High compression heads with 6:1 compression or higher.

The FSI 12v negative earth Electronic Ignition Centrifugal Advance Distributor for the Model A or B engine, features the PerTronix Electronic Ignitor and includes a cloth wire conduit.

It's full advance hits 16-18 degrees of centrifugal advance @ 2,000rpms. (for High compression heads with 6:1 compression or higher)

The unit simply connects to the coil in the same wiring position. No unsightly black box to hang on the firewall, and no condenser!

Requires 3 ohm coil and modern plug leads.
Note, Solid and stranded core spark plug wires should never be used with electronic ignitions.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £479.50  (£575.40 Incl. vat)

12v FSI Electronic Distributor A-12100-FSI12-ADV24

12v FSI Electronic Distributor A-12100-FSI12-ADV24

For stock heads and 5.5:1 compression ratios.

The FSI 12v negative earth Electronic Ignition Centrifugal Advance Distributor for the Model A or B engine, features the PerTronix Electronic Ignitor and includes a cloth wire conduit.

It's full advance hits 24-26 degrees of centrifugal advance@2,000rpms. (for stock heads and 5.5:1 compression ratios)

The unit simply connects to the coil in the same wiring position. No unsightly black box to hang on the firewall, and no condenser!

Requires 3 ohm coil and modern plug leads.
Note, Solid and stranded core spark plug wires should never be used with electronic ignitions.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £479.50  (£575.40 Incl. vat)

6v FSI Electronic Distributor A-12100-FSI6-ADV16

6v FSI Electronic Distributor A-12100-FSI6-ADV16

For High compression heads with 6:1 compression or higher.

The FSI 6v positive earth Electronic Ignition Centrifugal Advance Distributor for the Model A or B engine, features the PerTronix Electronic Ignitor and includes a cloth wire conduit.

It's full advance hits 16-18 degrees of centrifugal advance @ 2,000rpms. (for High compression heads with 6:1 compression or higher)

The unit simply connects to the coil in the same wiring position. No unsightly black box to hang on the firewall, and no condenser!

Requires 1.5 ohm coil and modern plug leads.
Note, Solid and stranded core spark plug wires should never be used with electronic ignitions.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability:  1 In Stock!


Price: £479.50  (£575.40 Incl. vat)

6v FSI Electronic Distributor A-12100-FSI6-ADV24

6v FSI Electronic Distributor A-12100-FSI6-ADV24

For stock heads and 5.5:1 compression ratios.

The FSI 6v positive earth Electronic Ignition Centrifugal Advance Distributor for the Model A or B engine, features the PerTronix Electronic Ignitor and includes a cloth wire conduit.

It's full advance hits 24-26 degrees of centrifugal advance@2,000rpms. (for stock heads and 5.5:1 compression ratios)

The unit simply connects to the coil in the same wiring position. No unsightly black box to hang on the firewall, and no condenser!

Requires 1.5 ohm coil and modern plug leads.
Note, Solid and stranded core spark plug wires should never be used with electronic ignitions.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability:  1 In Stock!


Price: £479.50  (£575.40 Incl. vat)

12V Zipper Distributor A-12100-ZIP12-ADV16

12V Zipper Distributor A-12100-ZIP12-ADV16

For High compression heads with 6:1 compression or higher.

The 12V Negative earth ZIPPER Electronic Ignition Centrifugal Advance Distributor is encased in a stock-appearing cast-iron housing and utilizes the stock Model A cap and body.

A Model A distributor stuffed with centrifugal weights and spring system. When compared side-by-side to the real thing, only a small increase in height is detected.

It's full advance hits 16-18 degrees of centrifugal advance @ 2,000rpms. (for High compression heads with 6:1 compression or higher)

Requires 3 ohm coil.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £675.00  (£810.00 Incl. vat)

12V Zipper Distributor A-12100-ZIP12-ADV24

12V Zipper Distributor A-12100-ZIP12-ADV24

For stock heads and 5.5:1 compression ratios.

The 12V Negative earth ZIPPER Electronic Ignition Centrifugal Advance Distributor is encased in a stock-appearing cast-iron housing and utilizes the stock Model A cap and body.

A Model A distributor stuffed with centrifugal weights and spring system. When compared side-by-side to the real thing, only a small increase in height is detected.

It's full advance hits 24-26 degrees of centrifugal advance@2,000rpms. (for stock heads and 5.5:1 compression ratios).

Requires 3 ohm coil.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability:  1 In Stock!


Price: £675.00  (£810.00 Incl. vat)

6V Zipper Distributor A-12100-ZIP6-ADV16

6V Zipper Distributor A-12100-ZIP6-ADV16

For High compression heads with 6:1 compression or higher.

The 6V Positive earth ZIPPER Electronic Ignition Centrifugal Advance Distributor is encased in a stock-appearing cast-iron housing and utilizes the stock Model A cap and body.

A Model A distributor stuffed with centrifugal weights and spring system. When compared side-by-side to the real thing, only a small increase in height is detected.

It's full advance hits 16-18 degrees of centrifugal advance @ 2,000rpms. (for High compression heads with 6:1 compression or higher)

Requires 1.5 ohm coil.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability:  1 In Stock!


Price: £675.00  (£810.00 Incl. vat)

6V Zipper Distributor A-12100-ZIP6-ADV24

6V Zipper Distributor A-12100-ZIP6-ADV24

For stock heads and 5.5:1 compression ratios.

The 6V Positive earth ZIPPER Electronic Ignition Centrifugal Advance Distributor is encased in a stock-appearing cast-iron housing and utilizes the stock Model A cap and body.

A Model A distributor stuffed with centrifugal weights and spring system. When compared side-by-side to the real thing, only a small increase in height is detected.

It's full advance hits 24-26 degrees of centrifugal advance@2,000rpms. (for stock heads and 5.5:1 compression ratios).

Requires 1.5 ohm coil.

Original style Model A Ford pop-out ignition key switch cannot be used with this system.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £675.00  (£810.00 Incl. vat)

12V FSI Ignition Module FSI-12vng-mod

12V FSI Ignition Module FSI-12vng-mod

Replacement module with top plate for the FSI distributor.

12v negative ground only.

Availability:  1 In Stock!


Price: £129.50  (£155.40 Incl. vat)

12V Zipper Ignition Module Zip-12vng-mod

12V Zipper Ignition Module Zip-12vng-mod

Replacement 12v module with top plate for the Zipper distributor.

12v negative ground only.

Availability:  2 In Stock!


Price: £129.50  (£155.40 Incl. vat)

12V Kit Ignition Module Kit-12vng-mod

12V Kit Ignition Module Kit-12vng-mod

Replacement module with top plate for the standard 12v FSI electronic conversion kit.

12v negative ground only. Fits our A-11574-FSI12 kit.

Availability:  2 In Stock!


Price: £129.50  (£155.40 Incl. vat)

6V FSI Ignition Module FSI-6vpg-mod

6V FSI Ignition Module FSI-6vpg-mod

Replacement module with top plate for the FSI distributor.

6v positive ground only.

Availability:  2 In Stock!


Price: £129.50  (£155.40 Incl. vat)

6V Zipper Ignition Module Zip-6vpg-mod

6V Zipper Ignition Module Zip-6vpg-mod

Replacement 6v module with top plate for the Zipper distributor.

6v positive ground only.

Availability:  2 In Stock!


Price: £129.50  (£155.40 Incl. vat)

6V Kit Ignition Module Kit-6vpg-mod

6V Kit Ignition Module Kit-6vpg-mod

Replacement module with top plate for the standard 6v FSI electronic conversion kit.

6v positive ground only. Fits our A-11574-FSI6 kit.

Availability:  2 In Stock!


Price: £129.50  (£155.40 Incl. vat)

1928-34 FSI Distributor Cap A-12105-FSI

1928-34 FSI Distributor Cap A-12105-FSI

Distributor cap for the FSI electronic distributor.

Fits distributors:
A-12100-FSI6
A-12100-FSI12

Availability:  2 In Stock!


Price: £19.50  (£23.40 Incl. vat)

1928-34 FSI Distributor Rotor Arm A-12200-FSI

1928-34 FSI Distributor Rotor Arm A-12200-FSI

Distributor rotor arm for the FSI electronic distributor.

Fits distributors:
A-12100-FSI6
A-12100-FSI12

Availability:  1 In Stock!


Price: £12.00  (£14.40 Incl. vat)

1928-34 Distributor Body  A-12105-B

1928-34 Distributor Body A-12105-B

1928-34 Distributor Body with brass inserts.

This one also has two locating notches, so fits the Model A or Model B distributor, plus the Zipper electronic distributor.

The brass contacts were not original but they are more corrosion resistant.

Made in USA.

Availability:  5 In Stock!


Price: £55.50  (£66.60 Incl. vat)

1928-34 Distributor Cap  A-12115

1928-34 Distributor Cap A-12115

Distributor Cap 1928-34.

Sits on top of the distributor body and is what the coil wire plugs into.

Availability:  10 In Stock!


Price: £16.50  (£19.80 Incl. vat)

1928-34 Distributor Rotor Arm A-12200

1928-34 Distributor Rotor Arm A-12200

Distributor Rotor arm for the Ford Model A and model B four cylinder engine.

Also fits the Zipper electronic distributor.

Made in USA

Availability:  17 In Stock!


Price: £13.50  (£16.20 Incl. vat)

1928-34 Performance Plug Lead Set A-12259-FSB

1928-34 Performance Plug Lead Set A-12259-FSB

High performance radio suppression spark plug lead set for the 1928-34 model A and B engine, when using a modern distributor cap, or our FSI electronic distributor.

Made by FS Ignitions in the USA, these are Low RF plug leads in black.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £55.00  (£66.00 Incl. vat)

1928-34 Performance Plug Lead Set A-12259-FSBY

1928-34 Performance Plug Lead Set A-12259-FSBY

High performance radio suppression spark plug lead set for the 1928-34 model A and B engine, when using a modern distributor cap, or our FSI electronic distributor.

Made by FS Ignitions in the USA, these are Low RF plug leads in black cotton braid with yellow tracer.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £75.00  (£90.00 Incl. vat)

1928-34 Performance Plug Lead Set A-12259-FSOR

1928-34 Performance Plug Lead Set A-12259-FSOR

High performance radio suppression spark plug lead set for the 1928-34 model A and B engine, when using a modern distributor cap, or our FSI electronic distributor.

Made by FS Ignitions in the USA, these are Low RF plug leads in orange cotton braid with red and black tracer.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £75.00  (£90.00 Incl. vat)

1928-34 Stainless Steel Lower Shaft  A-12249-SS

1928-34 Stainless Steel Lower Shaft A-12249-SS

New stainless steel version of the distributor Lower shaft for the 1928-34 model A and B engine.

We have seen these shafts get pretty mangled, when coolant has leaked past the head gasket and corroded the shaft. This stainless version should overcome this problem.

Availability: We can order this for you

Can be added to our next USA order! View Ordering Information


Price: £37.00  (£44.40 Incl. vat)

1928-31 Ignition Timing Indicator A-6252-I

1928-31 Ignition Timing Indicator A-6252-I

Geat item this! After fitting it on your front timing cover using the engine mounting bolt, you can mark top dead centre on your front pulley and use that mark for checking your ignition timing.

You no longer have any need to set timing using a pin.

I painted my indicator Ford engine green and it looks like it grew there.

Made in USA. "Genuine Nu-Rex".

Availability:  7 In Stock!


Price: £25.00  (£30.00 Incl. vat)

Recently Viewed