Ford Model A Parts and Spares 1928 to 1931
Start of Content
Parts ListingsFord Model AFord Flathead V8Stromberg CarburetorToolsOil Lube & PaintBrooklin Model CarsBooksFord DVD'sHandbags

InformationHomeAbout UsTestimonialsThe Model A FordFord Model A HistoryFord Model A Body StylesO'Neill Vintage Ford infoLinksHot Rod CartoonsContact Us

New Products

1932-48 All New Electronic Distributor

1932-48 All New Electronic Distributor

At last! an all new electronic distributor for the 1932-48 flathead ...
find out more

The Coupe Book

The Coupe Book

34.95

This is a superior compilation of all of the articles ever ...
find out more

The Tudor Book

The Tudor Book

25.95

In response to many members seeking a book devoted to a ...
find out more

1928-31 Rear Back Plate A-2200-A

1928-31 Rear Back Plate A-2200-A

195.00

This is a brand new rear backing plate with the brake ...
find out more

1928-31 Starter Switch Insulator Kit A-11450-X

1928-31 Starter Switch Insulator Kit A-11450-X

4.95

Starter Switch Insulator Kit for the Model A Ford starter switch, ...
find out more

1928-31 Running Board Anti Squeak Welt A-5135

1928-31 Running Board Anti Squeak Welt A-5135

6.60

Fed up of those running board creaking? "Place this thin ...
find out more

1928-31 Sparton Rebuild Kit A-13802-RBK

1928-31 Sparton Rebuild Kit A-13802-RBK

71.94

This is everything that you normally need to rebuild your Sparton ...
find out more

1929-31 Oil Return Pipe A-6648-B

1929-31 Oil Return Pipe A-6648-B

67.20

An all new reproduction of the later style return pipe. ...
find out more

DVD Rebuilding the Model A Ford Generator

DVD Rebuilding the Model A Ford Generator

23.99

How to rebuild the Model A Ford generator. Presented by Herb ...
find out more

DVD - Rebuilding the Model A Differential

DVD - Rebuilding the Model A Differential

23.99

61 minute Video technical seminar for the Model A Ford Differential ...
find out more

Vintage Ford Model A

Rear Axle

Ford Model A | Axle & Suspension |  Rear Axle

DVD - Rebuilding the Model A Differential

DVD - Rebuilding the Model A Differential

 


61 minute Video technical seminar for the Model A Ford Differential rebuild.
Presented by Alex Janke & Bob Grady of the Diablo A's Model A club in California USA.


How to dismantle and rebuild your Model A differential.
What to watch for when disassembling the used rear end.
How to identify parts that are re-usable and those that are beyond help.
What to look for when at swap meets.
What pitfalls to avoid when assembling your differential .

Watch a preview here

This video series is not made by professionals but by Model A Ford enthiusiasts, therefore please excuse any poor sound or picture issues.


Price: 19.99  (23.99 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-31 Rear Pannard Rod Kit A-5312

1928-31 Rear Pannard Rod Kit A-5312



Rear pannard rod for the 1928-31 Model A Ford.
Performs the same job as the front pannard bar except this mounts to the rear.

One end attaches to the axle center section and the other bracket attaches to frame. The bracket does require one hole to be drilled in bottom of the frame.

Note: Can not be used with the modern style shock absorber kit. made in USA.

Price: 175.00  (210.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Rear Perch / Shackle Bush A-4020

1928-31 Rear Perch / Shackle Bush A-4020



Shackle bushing 1928-31. For the rear leaf spring and the rear perches. Duplicate of the original. Made in USA.


Price: 1.95  (2.34 Incl. vat)



Availability:  6 In Stock!

Qty:     
1930-31 Rear Spring Perch Ball A-4024

1930-31 Rear Spring Perch Ball A-4024



Rear spring perch ball 1930-31. Ford started making the rear spring perch ball as a seperate piece in February of 1930. Made in USA.


Price: 5.50  (6.60 Incl. vat)



Availability:  7 In Stock!

Qty:     
1928-30 Straight Shank Rear Perch Ball A-4024-S

1928-30 Straight Shank Rear Perch Ball A-4024-S



Straight shank rear perch ball 1928-30. Ball that is part of the rear leaf spring perch that the shock link mounts to. Use this style when repairing perches that do not have a removable ball. Simply cut the old ball off, drill the perch to 9/16" press the new ball in and weld in place. The benefit to installing this style of repair ball is you don't have to ream the hole with a tapered reamer to install. Made in USA.


Price: 4.95  (5.94 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-48 Differential Drain or Filler Plug  A-4030

1928-48 Differential Drain or Filler Plug A-4030



Differential oil drain plug 1928-48. The original style. Can be used for both fill and the drain. Made in USA.


Price: 2.00  (2.40 Incl. vat)



Availability:  8 In Stock!

Qty:     
1928-48 Axle Housing Bolt Set A-4035-MB

1928-48 Axle Housing Bolt Set A-4035-MB



Complete set of 20 original style thick headed bolts that bolt the axle shaft housings to the differential housing.

Cad plated. Made in USA.


Price: 22.50  (27.00 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-31 Rear Axle Gasket Set  A-4035-S

1928-31 Rear Axle Gasket Set A-4035-S



Rear Axle Gasket set 1928-31. This gasket set takes care of the rear axle and the universal joint. 9 pc. set. Made in USA.


Price: 8.95  (10.74 Incl. vat)



Availability:  9 In Stock!

Qty:     
1911-27 Model T Axle Gasket Set T-2504-S

1911-27 Model T Axle Gasket Set T-2504-S



Model T Rear axle gasket set.

Consists of all gaskets for the rear end housing, drive shaft and universal joint. Made in U.S.A.


Price: 5.50  (6.60 Incl. vat)



Availability:  5 In Stock!

Qty:     
1928-32 Torque Tube Gasket  A-4207

1928-32 Torque Tube Gasket A-4207



Rear Axle Gasket 1928-32. For fastening the torque tube to the rear axle housing. Made in USA.


Price: 1.50  (1.80 Incl. vat)



Availability:  20 In Stock!

Qty:     
1928-32 Rear Axle Housing 0.010 Gasket A-4235-G

1928-32 Rear Axle Housing 0.010 Gasket A-4235-G



1928-32 Rear axle housing gasket. 0.010 thick.


Price: 3.29  (3.95 Incl. vat)



Availability:  14 In Stock!

Qty:     
1928-32 Rear Axle Housing 0.006 Gasket A-4235-G6

1928-32 Rear Axle Housing 0.006 Gasket A-4235-G6



Rear end housing gasket 1928-32. 0.006 thick. Made in USA.


Price: 3.29  (3.95 Incl. vat)



Availability:  10 In Stock!

Qty:     
1928-31 Ring & Pinion 3:78 Ratio  A-4209-F

1928-31 Ring & Pinion 3:78 Ratio A-4209-F



Standard 3:78 to 1 ratio ring & pinion for the 1928-31 Model A Ford.



Price: 479.17  (575.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Ring & Pinion 3.54 Ratio A-4209-HSF

1928-31 Ring & Pinion 3.54 Ratio A-4209-HSF



High speed 3:54 to 1 ring & pinion for the Model A Ford These higher speed gears will increase your speed slightly.

Made in Europe.


Price: 479.17  (575.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Ring and Pinion 3:27 Ratio A-4209-HSS

1928-31 Ring and Pinion 3:27 Ratio A-4209-HSS



3:27 ring and pinion 1928-31. The highest speed ratio gear set availlable today.

This is a very high ratio and takes a pretty strong running motor to run.

Made in USA.


Price: 895.83  (1,075.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Ring and Pinion 4.11 Ratio A-4209-411

1928-31 Ring and Pinion 4.11 Ratio A-4209-411



4.11 gear set 1928-31. A very desirable gear ratio when running overdrives. Plenty of power, but no top end if you are running without an overdrive.

Made in USA.


Price: 895.83  (1,075.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-31 Pinion Key A-4243-A

1928-31 Pinion Key A-4243-A



Differential pinion key 1928-31.

This is the key that locks the pinion gear in place on the end of the drive shaft.



Price: 2.50  (3.00 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Spider Gear Set A-4215

1928-31 Spider Gear Set A-4215



Spider gear set 1928-31. A set of 3 spider gears for the model A differential. Made to the Ford print!


Price: 175.00  (210.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1909-31 Drive Shaft Nut  T-2598

1909-31 Drive Shaft Nut T-2598



Drive shaft nut 1909-31 Model T and Model A Ford. This is the thin castle nut that holds the pinion gear to the end of the drive shaft.


Price: 4.95  (5.94 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Pinion Puller A-4210-T

1928-31 Pinion Puller A-4210-T



This tool is used for removing the drive shaft, pinion cup and pinion gear assembly from the rear end. Made in USA.


Price: 65.00  (78.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-31 Pinion Removal / Install Tool A-4210-X

1928-31 Pinion Removal / Install Tool A-4210-X



This is a new high quality tool set for removing and installing the pinion bearing assembly in the center axle section on the Model A Ford.


Price: 138.95  (166.74 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-32 Differential Bearing A-4221

1928-32 Differential Bearing A-4221



Differential bearing 1928-32. You will need a total of 4 of these: 2 in the differential, and 2 in the drive shaft.


Price: 45.50  (54.60 Incl. vat)



Availability:  7 In Stock!

Qty:     
1928-32 Differential Bearing Cup A-4222

1928-32 Differential Bearing Cup A-4222



Differential bearing cup 1928-32. You will need two of these inside the differential. Timken! Made in USA.


Price: 34.50  (41.40 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-31 Differential Bearing Shim A-4221-SH

1928-31 Differential Bearing Shim A-4221-SH



You can use this .005" thick shim between the A-4221 Bearing and the differential gear case to compensate for wear.

Assemble your rear end with out any gaskets between the axle housing and center section, if axle locks, you are good and don't need these shims. If axle turns freely, add shims until axle locks.
Sold individually. Made in U.S.A.


Price: 1.50  (1.80 Incl. vat)



Availability:  6 In Stock!

Qty:     
Differential Case Bolt Set A-4217-MB

Differential Case Bolt Set A-4217-MB



Differential Case Bolts
This set of 9 grade 5 bolts with castle nuts is used to attach the ring gear to the differential.


Price: 35.00  (42.00 Incl. vat)



Availability:  1 In Stock!

Qty:     
1909-48 Rear Axle Shim Set A-4235-SH

1909-48 Rear Axle Shim Set A-4235-SH



Axle shim set for the 1909-1948 Fords. These shims slide over the stub axle if the hub is worn. Also prevents the brake drum from rubbing against the backing plate. Set of 2.


Price: 3.50  (4.20 Incl. vat)



Availability:  3 In Stock!

Qty:     
1909-48 Knock-off Wheel Puller A-4235-WP

1909-48 Knock-off Wheel Puller A-4235-WP



Knock-off wheel puller 1909-48.

With the wheel still bolted onto the hub, take the axle nut off and screw this on.

Then you hit this to break the hub free from the axle. Made in USA.



Price: 5.50  (6.60 Incl. vat)



Availability:  4 In Stock!

Qty:     
1928-48 Rear Axle Nut set A-4242

1928-48 Rear Axle Nut set A-4242



Rear Axle Castellated nuts for holding on rear hubs. Set of 2. Made in USA.


Price: 4.95  (5.94 Incl. vat)



Availability:  3 In Stock!

Qty:     
1928-48 Rear Axle Nut A-4242-BR

1928-48 Rear Axle Nut A-4242-BR



Rear Axle Castellated nut for holding on rear hub.
You will need 2 of these.


Price: 2.50  (3.00 Incl. vat)



Availability:  6 In Stock!

Qty:     
1928-48 Rear Axle Key Set A-4243

1928-48 Rear Axle Key Set A-4243



1928-48 Rear stub axle key set.

Check your old keys to be sure that they aren't worn, as worn keys will damage the keyway in the stub axle.

Set of 2.


Price: 3.50  (4.20 Incl. vat)



Availability:  9 In Stock!

Qty:     
1928-48 Axle Hub Gasket Set  A-4244

1928-48 Axle Hub Gasket Set A-4244



Rear axle hub gasket set for the 1928 - 1931 Model A and the 1932 -1948 American V8.

These are a thick cork or fibre washer that goes in the recess of the rear hub, under the steel washer. Set of 2.


Price: 1.25  (1.50 Incl. vat)



Availability:  16 In Stock!

Qty:     
1928-48 Axle Washer Set A-4244-SW

1928-48 Axle Washer Set A-4244-SW



Axle washers 1928-48. These 1/8" thick washers go between the nut and the fibre washer that hold the rear hub to the axle.

Size 1 3/16" diameter with a 5/8" hole size. Set of two. Made in USA.


Price: 1.75  (2.10 Incl. vat)



Availability:  11 In Stock!

Qty:     
1928-48 Inner Axle & Drive Shaft Seal  A-4245

1928-48 Inner Axle & Drive Shaft Seal A-4245



1928-48 Inner Axle / Drive Shaft Seal. You will need 2 for the rear axles and one for the drive shaft.


Price: 3.50  (4.20 Incl. vat)



Availability:  7 In Stock!

Qty:     
1928-31 Axle Seal Tool  A-4246

1928-31 Axle Seal Tool A-4246



This is a tool for installing the A-4245 seals.

The inside of the tool has pipe threads. Just screw in a piece of your own pipe, so that the tool can reach inside the axle casing. Made in USA.


Price: 10.50  (12.60 Incl. vat)



Availability:  5 In Stock!

Qty:     
1928-31 Torque Tube to Housing Bolt Set A-4505-MB

1928-31 Torque Tube to Housing Bolt Set A-4505-MB



Torque tube to housing bolts 1928-31. Bolts needed to mount the torque tube to the rear end housing with drilled heads and wire. Thick head bolts. Made in USA.


Price: 10.95  (13.14 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-31 U-Joint Gasket Set A-7090-GS

1928-31 U-Joint Gasket Set A-7090-GS



U-joint gasket set 1928-31. The gasket set needed for the Model A U-joint.

Price: 5.50  (6.60 Incl. vat)



Availability:  11 In Stock!

Qty:     
1928-31 Universal Joint Housing Felt A-4516

1928-31 Universal Joint Housing Felt A-4516



If you just need the universal joint housing felt seal, this is it.

You will need two of these.


Price: 1.50  (1.80 Incl. vat)



Availability:  8 In Stock!

Qty:     
1928-31 Universal Joint Housing Bolt Set  A-4520-MB

1928-31 Universal Joint Housing Bolt Set A-4520-MB



Universal joint housing bolt set, thick head 1928-31. Complete set of bolts, nuts and cotter pins for assembling the U-joint housing.


Price: 15.95  (19.14 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-31 Drive Shaft A-4605-B

1928-31 Drive Shaft A-4605-B



Drive shaft 1928-31. A very well made drive shaft for the model A. Exact in every detail! Made in USA.


Price: 348.00  (417.60 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
1928-32 Pinion Bearing Cup A-4616

1928-32 Pinion Bearing Cup A-4616



Pinion bearing cup 1928-32. This is a double sided cup for the pinion bearings.


Price: 72.46  (86.95 Incl. vat)



Availability:  1 In Stock!

Qty:     
1928-32 Pinion Bearing Nut A-4634

1928-32 Pinion Bearing Nut A-4634



Pinion bearing nut 1928-32. The large nut that secures the pinion gear into the pinion bearing assembly. 2 required. Made in USA.


Price: 4.95  (5.94 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-31 Pinion Nut Wrench  A-4634-T

1928-31 Pinion Nut Wrench A-4634-T



Pinion nut wrench 1928-31. Laser cut from 1/4" steel. You will need two of these to hold both nuts. Made in USA.



Price: 17.50  (21.00 Incl. vat)



Availability:  4 In Stock!

Qty:     
1928-47 Pinion Lock Washer A-4636

1928-47 Pinion Lock Washer A-4636



Pinion Lock washer 1928-47. The ears of this washer get bent around the pinion bearing nut to secure them in place. Should always be replaced.


Price: 3.50  (4.20 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-31 Pinion Thrust Washer A-4637

1928-31 Pinion Thrust Washer A-4637



The Model A Ford Pinion thrust washer that goes behind the pinion bearing nut. Made in USA.


Price: 3.00  (3.60 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-48 Drive Shaft Bearing  A-4645

1928-48 Drive Shaft Bearing A-4645



Drive shaft bearing for the 1928-48 Fords. The bearing at the front of the torque tube. Made in USA.


Price: 21.25  (25.50 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-48 Drive Shaft Bearing Sleeve A-4655

1928-48 Drive Shaft Bearing Sleeve A-4655



Drive shaft Bearing sleeve 1928-48. The sleeve for the drive shaft bearing in the front of the torque tube. Made in USA.


Price: 9.58  (11.50 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-32 Radius Rod Mounting Bolt A-4750-MB

1928-32 Radius Rod Mounting Bolt A-4750-MB



Radius rod mounting bolt 1928-32.

This is the larger sized bolt, nut and cotter pin that attach the rear radius rods to the torque tube just behind the U-joint.


Price: 8.29  (9.95 Incl. vat)



Availability:  2 In Stock!

Qty:     
1928-31 Axle Shaft A-4235

1928-31 Axle Shaft A-4235



Axle shaft for the 1928-31 Model A Ford.

CURRENTLY UNAVAILABLE!




Quick Change Axle Look-Alike A-4025QCE

Quick Change Axle Look-Alike A-4025QCE



Aluminium quick change axle look-alike with centred filler plug.

Mounts to back of rear end with special oil filler plug adapter. Made in USA.


Price: 220.00  (264.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     
Quick Change Axle Look-Alike A-4025QCL

Quick Change Axle Look-Alike A-4025QCL



Aluminium quick change axle look-alike with offset filler plug.

Mounts to back of rear end with special oil filler plug adapter. Made in USA.


Price: 220.00  (264.00 Incl. vat)



Availability: We can order this for you

Can be added to our next USA order!View Ordering Information

Qty:     

Ford Model A | Axle & Suspension |  Rear Axle

Best Sellers

Model A Ford Maintenance DVD

Model A Ford Maintenance DVD

23.99

Features Alex Janke & Bob Grady, MAFCA Judges. Let ...
find out more

1928-34 Points Gap Setting Tool A-12198

1928-34 Points Gap Setting Tool A-12198

35.95

At last! No more having to turn the engine over ...
find out more

Model A Ford Mechanics Handbook Vol 1

Model A Ford Mechanics Handbook Vol 1

45.00

A 'Must Have' book for model A owners! Now Signed ...
find out more

Model A Ford Mechanics Handbook Vol 2

Model A Ford Mechanics Handbook Vol 2

37.50

Now Signed by the author for us! Companion guide to ...
find out more

Model A Ford Troubleshooting & Diagnostics

Model A Ford Troubleshooting & Diagnostics

32.50

Now Signed by the author for us! The third book ...
find out more

1928-31 Standard Condenser A-12300-SP

1928-31 Standard Condenser A-12300-SP

11.40

1928-31 Condenser for the standard original style model A distributor. ...
find out more

Model A Service Bulletins - Code: BP-1PB

Model A Service Bulletins  -  Code: BP-1PB

29.94

A new soft bound A4 version of the popular service bulletins. ...
find out more

1928-31 Distributor Points A-12199

1928-31 Distributor Points  A-12199

23.10

Original style distributor points for the 1928-31 Model A. Comes ...
find out more

Model A Ford Hat A-18657-AB

Model A Ford Hat  A-18657-AB

14.95

Model A Hat. This is an adjustable navy blue ball ...
find out more

1928-34 Safety Fuse Kit A-11450-SF

1928-34 Safety Fuse Kit A-11450-SF

23.99

Every Model A should have one of these! Safety Fuse kit ...
find out more


Penrite Vintage Oil


Gibbs Lubricant


Stromberg Carburetor


spacer
End of Content