basket-icon

My Cart

Items: 
Value: 

Stromberg 97

Stromberg E-Fire Distributor

Stromberg E-Fire Distributor

Stromberg E-Fire Distributor

All new electronic distributors for the 1932-53 Ford flathead V8.

Manufactured by Stromberg Speed Parts in the UK,
The 11A and 21A styles are available in both mounting variants of 2 and 3 bolt configuration, with 12v negative earth or 6v positive earth options.

New to the range is the 12v 8BA style for the 1949-53 8BA Ford & Mercury flathead V8.

Stromberg E-Fire Electronic Distributor 11A-6

Stromberg E-Fire Electronic Distributor 11A-6

All new electronic distributor for the flathead V8

3 bolt mounting.

6v positive earth, Manufactured in England by Stromberg.

Requires 1.5 ohm coil.

IMPORTANT!
Electronic modules DO NOT like bad grounding.
Make sure the engine & distributor has a good ground.




Availability:  2 In Stock!


Price: £300.00  (£360.00 Incl. vat)

Stromberg E-Fire Electronic Distributor 11A-12

Stromberg E-Fire Electronic Distributor 11A-12

All new electronic distributor for the flathead V8.

3 bolt mounting.

12v negative earth, Manufactured in England by Stromberg.

Requires 1.5 ohm coil.

IMPORTANT!
Electronic modules DO NOT like bad grounding.
Make sure the engine & distributor has a good ground.




Availability:  1 In Stock!


Price: £300.00  (£360.00 Incl. vat)

Stromberg E-Fire Electronic Distributor 21A-6

Stromberg E-Fire Electronic Distributor 21A-6

All new electronic distributor for the flathead V8

2 bolt mounting.

6v positive earth, Manufactured in England by Stromberg.

Requires 1.5 ohm coil.

IMPORTANT!
Electronic modules DO NOT like bad grounding.
Make sure the engine & distributor has a good ground.




Availability:  2 In Stock!


Price: £300.00  (£360.00 Incl. vat)

Stromberg E-Fire Electronic Distributor 21A-12

Stromberg E-Fire Electronic Distributor 21A-12

All new electronic distributor for the flathead V8

2 bolt mounting.

12v negative earth, Manufactured in England by Stromberg.

Requires 1.5 ohm coil.

IMPORTANT!
Electronic modules DO NOT like bad grounding.
Make sure the engine & distributor has a good ground.




Availability: We can order this for you

Usually dispatched within 7 days.


Price: £300.00  (£360.00 Incl. vat)

Stromberg E-Fire Electronic Distributor 8BA-12

Stromberg E-Fire Electronic Distributor 8BA-12

All new electronic distributor for the 1949-53 8BA flathead V8

12v negative earth only, Manufactured in England by Stromberg.

Requires 1.5 ohm coil.

IMPORTANT!
Electronic modules DO NOT like bad grounding.
Make sure the engine & distributor has a good ground.




Availability: We can order this for you

Usually dispatched within 7 days.


Price: £350.00  (£420.00 Incl. vat)

Ford V8-60 Distributor Adaptor E62A-21A-ADP

Ford V8-60 Distributor Adaptor E62A-21A-ADP

If you have the smaller Ford V8-60 horsepower 17 stud V8 engine, you can now run the Stromberg E-Fire 21A electronic distributor.

CNC machined in the UK.

Note: You must use the 21A-6 or the 21A-12 two bolt distributor with this adaptor plate.

Availability:  4 In Stock!


Price: £104.13  (£124.95 Incl. vat)

Flathead V8 Timing Indicator 18-6252-P

Flathead V8 Timing Indicator 18-6252-P

Stainless steel Ford Flathead V8 timing pointer.

Simply fits on the front of the engine. The bottom hole slotted so there is no need to remove the pulley.

Availability:  10 In Stock!


Price: £29.50  (£35.40 Incl. vat)

Stromberg E-Fire Braided Spark Plug Wire Set 9706K

Stromberg E-Fire Braided Spark Plug Wire Set 9706K

New cotton braided version of the popular Stromberg lead set, designed to work with both electronic and points-style distributors, e-FIRE plug wires give you strong fire power with high level RFI/EMI resistance.

The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100% silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs too.

Easy installation is always high on our list. So with the Ford Flathead engine firmly in mind, the 90-degree cap terminals and boots are pre-fitted for smarter ‘distributor first’ installation. Why? Because we know how hard it is to trim those front mount distributor wires up close to the radiator where access is limited. Your knuckles will thank you. Plus it leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod spark plug terminals.

All leads are 7mm diameter so they fit through your flathead plug wire looms or tubes. They’re cut to length, too, with a long coil wire to reach your firewall.

Note: These leads fit front mount Ford 21A ‘crab cap’ distributors (e-FIRE and Original Equipment are the same) and 1949-53 8BA distributors.

(If you have the 59A style distributor with a seperate inner and outer cap, you will need the E62A-708190 lead set).

Availability:  1 In Stock!


Price: £79.13  (£94.95 Incl. vat)

Stromberg E-Fire Spark Plug Wire Set 9705K

Stromberg E-Fire Spark Plug Wire Set 9705K

Designed to work with both electronic and points-style distributors, e-FIRE plug wires give you strong fire power with high level RFI/EMI resistance.

The spiral-wound, stainless steel suppression core is protected by tough fiberglass reinforcing braid for strength and flexibility. And the 100% silicone insulation resists high temperatures, moisture, oil and chemicals, and protects against arcing and voltage leaks. With low 500 Ohm/ft resistance, they get more energy into your plugs too.

Easy installation is always high on our list. So with the Ford Flathead engine firmly in mind, the 90-degree cap terminals and boots are pre-fitted for smarter ‘distributor first’ installation. Why? Because we know how hard it is to trim those front mount distributor wires up close to the radiator where access is limited. Your knuckles will thank you. Plus it leaves you free to use the supplied 90-degree spark plug boots or choose your own hot rod spark plug terminals.

All leads are 7mm diameter so they fit through your flathead plug wire looms or tubes. They’re cut to length, too, with a long coil wire to reach your firewall.

Note: These leads fit front mount Ford 21A ‘crab cap’ distributors (e-FIRE and Original Equipment are the same) and 1949-53 8BA distributors.

(If you have the 59A style distributor with a seperate inner and outer cap, you will need the 78-12259 lead set).

Availability:  3 In Stock!


Price: £52.50  (£63.00 Incl. vat)

1942-48 Distributor Cap 9701K

1942-48 Distributor Cap 9701K

1942-48 Flathead V8 Distributor Cap, Crab Type.

Fits Stromberg e-FIRE and original equipment Ford 21-A crab-style distributors.

(Not for Ford V8 Pilot with Lucas distributor).

Availability:  1 In Stock!


Price: £29.13  (£34.95 Incl. vat)

1932-48 E-Fire Rotor Arm 9702K

1932-48 E-Fire Rotor Arm 9702K

Rotor arm for use with the E-Fire electronic
Flathead V8 distributor.

Availability: We can order this for you

This item can be added to our next order!


Price: £13.75  (£16.50 Incl. vat)

Stromberg E-Fire Gasket Set 9703K-11A

Stromberg E-Fire Gasket Set 9703K-11A

Stromberg E-Fire Gasket Set.

Fits between timing cover and three-bolt, e-FIRE 11A distributor.

Set of 3.

Availability:  1 In Stock!


Price: £3.75  (£4.50 Incl. vat)

Stromberg E-Fire Gasket Set 9703K-21A

Stromberg E-Fire Gasket Set 9703K-21A

Stromberg E-Fire Gasket Set.

Fits between timing cover and two-bolt, e-FIRE 21A distributor.

Set of 3.

Availability:  3 In Stock!


Price: £3.75  (£4.50 Incl. vat)

E-Fire Distributor 6V Module Kit 9704K-6

E-Fire Distributor 6V Module Kit 9704K-6

Replacement plate and 6v positive ground module for the E-Fire distributor.

Includes module, mounting plate, rubber sleeve, screws and trigger ring.

Availability:  2 In Stock!


Price: £64.13  (£76.95 Incl. vat)

E-Fire Distributor 12V Module Kit 9704K-12

E-Fire Distributor 12V Module Kit 9704K-12

Replacement plate and 12v negative ground module for the E-Fire distributor.

Includes module, mounting plate, rubber sleeve, screws and trigger ring.

Availability: We can order this for you

This item can be added to our next order!


Price: £64.13  (£76.95 Incl. vat)

Recently Viewed