basket-icon

My Cart

Items: 
Value: 

Ford Flathead V8

V8 Water Pump

1932-36 Water Pump Rebuild Kit 68-8591

1932-36 Water Pump Rebuild Kit 68-8591

1932-36 Water Pump Rebuild Kit for the 21 stud Flathead V8 engines with the water pump in the cylinder head.

(2 kits needed per vehicle).

Availability:  5 In Stock!


Price: £59.00  (£70.80 Incl. vat)

1937-48 Water Pump Rebuild Kit 78-8591

1937-48 Water Pump Rebuild Kit 78-8591

1937-48 Water Pump Rebuild Kit for passenger car. (2 kits needed per vehicle).

For use with original single pulley pumps.

Does not include a snap ring which is not available.

Availability:  10 In Stock!


Price: £55.00  (£66.00 Incl. vat)

1937-48 Truck Water Pump Rebuild Kit 79-8591

1937-48 Truck Water Pump Rebuild Kit 79-8591

1937-48 Truck twin belt pulley water pump rebuild kit.

SORRY, THESE ARE NO LONGER MADE!

V8-60 Water Pump Rebuild Kit 52-8591-C

V8-60 Water Pump Rebuild Kit 52-8591-C

Water pump rebuild kit for the 60 HP American Flathead Ford V8 (V8-60) engine only.

Fits: 1937-39 Ford Deluxe or Standard Passenger car or Pickup Truck, when fitted with the smaller 17 stud V8-60 engine.
(Also fits some British & European cars).

Availability: In stock - Last Chance!


Price: £136.00  (£163.20 Incl. vat)

1949-53 Water Pump Rebuild Kit A8C-8591

1949-53 Water Pump Rebuild Kit A8C-8591

Water Pump Rebuild Kit for the 1949-53 American Ford / Mercury 8BA Flathead V8.

Note, some of the 1949 pumps were different, so you might find the kit will not work with them.
If in doubt, use new pumps.

(Not for V8 Pilot).

Availability:  4 In Stock!


Price: £56.00  (£67.20 Incl. vat)

1932-34 Water Pump Set 40-8501-BD

1932-34 Water Pump Set 40-8501-BD

Set of 2 Top quality Water Pumps for the 1932-34 American Ford V8.

These pumps mount and work for replacing original 1932 V8 pumps (which have an approximately 2 longer water-hose neck).

Revive your cooling system and prolong engine life by installing fresh pumps.

Features Better Impeller Design, Ceramic Seals, Smoother inner Surfaces for Better Coolant Flow, Sealed Bearings (no need to grease), Gaskets included.

Premium product by Bob Drake Reproductions.

Availability:  6 In Stock!


Price: £199.00  (£238.80 Incl. vat)

1933-36 Water Pump 68-8502-N

1933-36 Water Pump 68-8502-N

Brand new water pump by Dennis Carpenter for the 21 stud Ford flathead V8 that has the water pump in the cylinder head.

This one has the extra boss take off with a 5/8-18 thread, for a sender unit adaptor. Fits left or right side.

ALL NEW HOUSING
Our pump housings are new castings (not rebuilds) guaranteeing that there are no coolant-leaking stress cracks. Each housing's mounting surface is machined straight & true ensuring water-tight sealing when mounted to your flathead.

DOUBLED ROW SEALED BALL BEARINGS
Original water pump impeller shafts relied on bronze bushings as bearings & were prone to premature wear. Our new pump shafts spin on double row ball bearings which extends pump life & decreases frictional heat.

CERAMIC SEALS
Ceramic Seals have a greater resistance to wear which significantly reduces the possibility of leakage & prolongs the life of the pumps.

Availability:  4 In Stock!


Price: £149.00  (£178.80 Incl. vat)

1932-36 Water Pump Gasket 18-8507

1932-36 Water Pump Gasket 18-8507

Water pump gasket for the 1932-36 flathead V8 with the water pump in the cylinder head.

Availability:  23 In Stock!


Price: £2.50  (£3.00 Incl. vat)

1937-48 Right Water Pump 78-8501-N

1937-48 Right Water Pump 78-8501-N

New Water Pump by Dennis Carpenter Reproductions.
Fits the right side (Passenger Side on a LHD car), with Gasket.

ALL NEW HOUSING
Pump housings are new castings (not rebuilds) guaranteeing that there are no coolant-leaking stress cracks. Each housing's mounting surface is machined straight & true ensuring water-tight sealing when mounted to your flathead.

DOUBLED ROW SEALED BALL BEARINGS
Original water pump impeller shafts relied on bronze bushings as bearings & were prone to premature wear. Our new pump shafts spin on double row ball bearings which extends pump life & decreases frictional heat.

CERAMIC SEALS
Ceramic Seals have a greater resistance to wear which significantly reduces the possibility of leakage & prolongs the life of the pumps.

HELICAL IMPELLER DESIGN
The angled arrangement of the impeller blades allows the coolant to flow faster through the radiator system at lower rpms. This results in a cooler running engine when operating at idle speed.

Availability:  1 In Stock!


Price: £150.00  (£180.00 Incl. vat)

1937-48 Left Water Pump 78-8502-N

1937-48 Left Water Pump 78-8502-N

New Water Pump by Dennis Carpenter Reproductions.

Fits the left Side (Drivers Side on a LHD car), with Gasket.

ALL NEW HOUSING
Pump housings are new castings (not rebuilds) guaranteeing that there are no coolant-leaking stress cracks. Each housing's mounting surface is machined straight & true ensuring water-tight sealing when mounted to your flathead.

DOUBLED ROW SEALED BALL BEARINGS
Original water pump impeller shafts relied on bronze bushings as bearings & were prone to premature wear. Our new pump shafts spin on double row ball bearings which extends pump life & decreases frictional heat.

CERAMIC SEALS
Ceramic Seals have a greater resistance to wear which significantly reduces the possibility of leakage & prolongs the life of the pumps.

HELICAL IMPELLER DESIGN
The angled arrangement of the impeller blades allows the coolant to flow faster through the radiator system at lower rpms. This results in a cooler running engine when operating at idle speed.

Availability:  3 In Stock!


Price: £150.00  (£180.00 Incl. vat)

1937-48 Water Pump Gasket  78-8507

1937-48 Water Pump Gasket 78-8507

Water Pump Gasket for the 1937-48 flathead V8 engine with the water pump as part of the front engine mounting.

Availability:  37 In Stock!


Price: £3.00  (£3.60 Incl. vat)

1937-48 Stainless Pump Mount Kit 78-8501-BOLTS

1937-48 Stainless Pump Mount Kit 78-8501-BOLTS

Stainless steel water pump mounting kit for the 1937-48 Ford flathead V8 water pumps.

Also fits English V8 Pilot.

Made in USA.

Availability:  12 In Stock!


Price: £25.50  (£30.60 Incl. vat)

1949-53 Stainless Pump Mount Kit 8BA-8501-BOLTS

1949-53 Stainless Pump Mount Kit 8BA-8501-BOLTS

Stainless steel water pump mounting kit for the 1949-53 American Ford 8BA flathead V8 water pumps.

(Not V8 Pilot). Made in USA.

Fits:
1948-53 American Ford V8 pickup
1949-53 American Ford V8 car

Availability:  14 In Stock!


Price: £25.50  (£30.60 Incl. vat)

1949-53 Truck Right Water Pump 8RT-8501-N

1949-53 Truck Right Water Pump 8RT-8501-N

New right side water pump for the 1949-53 flathead V8 truck.

These are often used when installing a 49-53 flathead V8 into a 1932-48 Ford. Uses 5/8" wide fan belt.
Single pulley only.

Availability:  1 In Stock!


Price: £162.00  (£194.40 Incl. vat)

1949-53 Truck Left Water Pump 8RT-8502-N

1949-53 Truck Left Water Pump 8RT-8502-N

New left side water pump for the 1949-53 flathead V8 truck.

These are often used when installing a 49-53 flathead V8 into a 1932-48 Ford. Uses 5/8" wide fan belt.
Single pulley only.

Availability:  2 In Stock!


Price: £162.00  (£194.40 Incl. vat)

1949-53 V8 Right Water Pump EAB-8501-N

1949-53 V8 Right Water Pump EAB-8501-N

1949-53 Flathead V8 Right Side Water Pump when using the thin 3/8 Fan Belt.

Availability:  2 In Stock!


Price: £159.00  (£190.80 Incl. vat)

1949-53 V8 Left Water Pump EAB-8502-N

1949-53 V8 Left Water Pump EAB-8502-N

1949-53 Flathead V8 Left Side Water Pump when using the thin 3/8 Fan Belt.

Availability:  3 In Stock!


Price: £159.00  (£190.80 Incl. vat)

1949-53 V8 Right Water Pump Wide Belt 8BA-8501-N

1949-53 V8 Right Water Pump Wide Belt 8BA-8501-N

1949-53 Flathead V8 Right Side Water Pump when using a 5/8 wide Fan Belt.

Availability:  3 In Stock!


Price: £159.00  (£190.80 Incl. vat)

1949-53 V8 Left Water Pump Wide Belt  8BA-8502-N

1949-53 V8 Left Water Pump Wide Belt 8BA-8502-N

1949-53 Flathead V8 Left Side Water Pump when using a 5/8 wide Fan Belt.

Availability:  1 In Stock!


Price: £159.00  (£190.80 Incl. vat)

1949-53 Water Pump Gasket  8BA-8507

1949-53 Water Pump Gasket 8BA-8507

1949-53 Water Pump Gasket 8BA-8507

Availability:  8 In Stock!


Price: £5.00  (£6.00 Incl. vat)

1932-34 Model 'B' Water Pump Gasket B-8507

1932-34 Model 'B' Water Pump Gasket B-8507

Model 'B' water pump gasket 1932-34.

Used on the 1932-34 4-cylinder water pumps.

Availability:  15 In Stock!


Price: £1.50  (£1.80 Incl. vat)

Lucas Super Coolant E62A-10640

Lucas Super Coolant E62A-10640

LUCAS Super Coolant Fluid 16fl oz 473ml.

Lucas Super Coolant has been scientifically formulated to provide the ultimate protection in automotive and racing cooling systems. It protects the entire system from rust, corrosion and electrolysis including aluminium.

This unique formula prevents deposits that can cause overheating, and has been proven to reduce coolant temperatures up to 20°F / -6°C. Lower cylinder head temperatures means advanced ignition and more horsepower.

One bottle treats 12-20 quarts of a 50/50 water antifreeze mix. Two bottles are required for straight water coolant.

***UK DELIVERY ONLY*** We cannot ship these to Europe!

Availability:  12 In Stock!


Price: £14.13  (£16.95 Incl. vat)

Recently Viewed